Playback (VCR)
TV/VCR
Cassette tape playback
To play a prerecorded tape.
| PLAY |
Illustration of MW20F12 | STOP |
| FF |
| REV |
Playback
1 Load a pre-recorded tape:
(When loading a cassette tape without the erase prevention tab, playback will start automatically).
2 | To start playback: |
|
Press PLAY on the front panel or on | ||
| the remote. |
|
| Playback will start. “ | ” will appear |
| on the screen for about 4 seconds. |
To stop playback:
Press STOP/EJECT once on the front panel or press STOP on the remote. The tape will stop but remain fully loaded and ready to play.
“ ” will appear on the screen for about 4 seconds.
Notes:
•If you play a prerecorded tape after the DVD playback, you must set the unit to TV/VCR mode using the TV/VCR button.
•This unit selects the playback tape speed SP or SLP auto- matically.
•When you select the TV/VCR mode during DVD playback, DVD playback will change to the still mode, and after 5 minutes it will change to the resuming playback mode automatically.
Rewind or forward the tape
Stop the playback or recording with STOP.
To rewind the tape:
Press REW on the front panel or press
REV on the remote control.
To forward the tape:
Press FF on the front panel or press
FFon the remote control.
To stop the
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture search mode (see 35 ). To do this, press REV or FF again and hold it down. The unit will resume the tape winding as soon as the button is released.
34
5W50101A | 34 | 2/23/06, 1:49 PM |