Recording (VCR)
Recording a TV program | TV/VCR | |
| ||
Recording and viewing the same TV program. | CH / |
STOP
PAUSE/STILL
REC
SPEED
Recording a TV program
1 Load a cassette tape with the erase prevention tab intact.
The unit will automatically turn on.
2 Press SPEED to select the desired tape speed SP or SLP.
The tape counter and SP orSLPwill appear on the screen for about 4 seconds.
To stop recording
Press STOP to stop recording.
“ ” will appear on screen for about 4 seconds.
To stop recording temporarily
Select “TV” or “CABLE” to the appropriate
3 position 26 .
TV - VHF/UHF channels
CABLE - Cable TV channels
4 Press Direct channel selection
CH 110
Press PAUSE/STILL to avoid recording unwanted material.
“ ” will appear on the screen and the REC/OTR indicator will blink on and off. Press PAUSE/STILL or REC to continue the recording.
REC/OTR
Note:
The pause function will be released after 5 minutes to prevent damage to the tape or the unit. The unit will change to the STOP mode.
5 Press REC.
“ ” will appear on the screen for about 4 seconds and the REC/OTR
indicator on the front panel will light.
REC/OTR
Notes:
•If power is switched off during recording, the TV and the DVD sections go off and the VCR continues to record. Press the STOP button to halt the recording and turn off the VCR.
•The unit channel cannot be changed during recording.
•If you record the TV program after the DVD playback, you must set the unit to TV/VCR mode using the TV/VCR button.
Auto Rewind feature
This VCR will automatically rewind the tape when the tape has ended (except during OTR and timer recording). It will also eject the tape.
Note:
If the erase prevention tab is removed, the tape will eject when REC button is pressed for recording.
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability.
38
5W50101A | 38 | 2/22/06, 6:42 PM |