GE ZEK938, ZEK958 owner manual SELF-CLEANING Oven

Page 5

SAFETY PRECAUTIONS

•Do not leave children alone—children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

•Do not touch the heating elements or the interior surface of the oven. These surfaces may be hot enough to burn even though they are dark in color. During and after use, do not touch, or let clothing or other flammable materials contact, any interior area of the oven; allow sufficient time for cooling first.

Potentially hot surfaces include the oven vent openings and surfaces near the openings, crevices around the oven door, the edges of the door window and metal trim parts above the door.

Remember: The inside surface of the oven may be hot when the door is opened.

•CAUTION: ITEMS OF INTEREST TO CHILDREN SHOULD NOT BE STORED IN CABINETS ABOVE A WALL OVEN— CHILDREN CLIMBING ON THE OVEN TO REACH ITEMS COULD BE SERIOUSLY INJURED.

•Never wear loose-fitting or hanging garments while using the appliance. Be careful when reaching for items stored over the oven. Flammable material could be ignited if brought in contact with oven heating elements and may cause severe burns.

•Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

•Keep the oven vent unobstructed.

•Place the oven rack in the desired position while the oven is cool. If racks must be handled when hot, do not let pot holder contact the heating elements.

•Never leave jars or cans of fat drippings in or near your oven.

•Pulling out the rack to the rack stop is a convenience in lifting heavy foods. It is also a precaution against burns from touching hot surfaces of the door or oven walls.

•When using cooking or roasting bags in the oven, follow the manufacturer’s directions.

•Do not use your oven to dry newspapers. If overheated, they can catch on fire.

•Do not use oven for a storage area. Items stored in an oven can ignite.

•Do not leave paper products, cooking utensils or food in the oven when not in use.

•Do not allow anyone to climb, stand or hang on the door. They could damage the oven or cause severe personal injury.

•Use only dry pot holders—moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch oven heating elements. Do not use a towel

or other bulky cloth.

•After broiling, always take the broiler pan out of the oven and clean it. Leftover grease in the broiler pan can catch fire the next time you use the pan.

•Stand away from the oven when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes.

•Large scratches or impacts to glass doors can lead to broken or shattered glass.

SELF-CLEANING OVEN

•Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.

•Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven. Residue from oven cleaners will damage the inside of the oven when the self-clean cycle is used.

•Clean only parts listed in this Owner’s Manual.

•Before self-cleaning the oven, remove the broiler pan, grid and other cookware.

•Be sure to wipe up excess spillage before starting the self-cleaning operation.

•If the self-cleaning mode malfunctions, turn the oven off and disconnect the power supply. Have it serviced by a qualified technician.

SAVE THESE INSTRUCTIONS

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 27″ and 30″ Convection Wall Oven Introduction ContentsIf you need service Before using your wall ovenWrite down the model & serial numbers If you received a damaged wall oven Save time & moneyImportant Safety Notice SELF-CLEANING Oven Baking or Roasting and Broiling sections Design informationOven Light ON/OFF. Press to turn the oven lights on or off Features of your oven control, clock and timerTones Start pad Clock To set the clock Power failureTimer To reset the timer Using the timerTo cancel the timer Control lockoutTones at the end of a timed cycle Tone volume Special features of your oven controlHour Hour or clock blackout Hour shut off Special Features Sabbath Feature How to set for regular baking or roasting Using the Sabbath FeatureUsing the Sabbath Feature How to exit the Sabbath feature Before you begin… How to set the oven for baking or roastingAluminum foil Preheating and pan placementHI Broil How to set the oven for broilingComments Broiling guide for 27 ″ ovens on some modelsBroiling guide for 30 ″ ovens on some models How to set an immediate start and automatic stop Using the timed baking and roasting featuresHow to set Delayed start and automatic stop Cable Plug Probe Handles Temperature probeProper placement of the probe How to set the oven for roasting when using the probe Fan ConvectionRack BakingConvection roasting Cookware for convection cookingPaper and Plastic Metal and GlassConvection roasting guide How to set the oven for convection baking or roastingPage Using the timed features for convection cooking How to set Delayed start and automatic stop To Crisp Stale Items How to set the oven for warmingHow to set the oven for proofing Type of margarine will affect baking performance To adjust the oven thermostatDo it yourself How to set the oven for cleaning Before a clean cycleAfter a clean cycle How to delay the start of cleaningStainless steel Oven racks and convection roasting rackMetal parts Broiler pan and gridTo replace the door Lift-off oven door- removalTo remove the door Removable oven floor Oven doorOven heating elements Control panelProbe Oven light bulbsTo remove To replaceDo not Work Before You Call For Service…After a Clean Trouble- shooting tips Before You Call For Service…Wall Oven Wall Oven We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Consumer Services From the Date Original Purchase Your Monogram Wall Oven Warranty

ZEK938, ZEK958 specifications

The GE ZEK958 and ZEK938 are advanced digital relays designed for protecting and monitoring electrical power systems. These devices are part of GE's broader line of protective relays, which harness cutting-edge technology to ensure reliable performance and robust protection for critical electrical assets.

One of the main features of the GE ZEK958 and ZEK938 is their comprehensive protection capabilities. Both models offer multifunctional protection, including overcurrent, earth fault, and distance protection. They are adept at detecting and isolating potential faults, which can prevent equipment damage and enhance system reliability.

The ZEK958 model is particularly noted for its advanced communication protocols. It supports multiple communication standards, including IEC 61850, DNP3, and Modbus, allowing for seamless integration into modern substation automation systems. This connectivity capability ensures that real-time data can be shared across various systems, facilitating enhanced monitoring and control.

Conversely, the GE ZEK938 is designed for applications that require high-speed tripping and resilience in harsh environments. It caters to the needs of utilities and industries where rapid fault detection is crucial. The ZEK938 features robust housing and is rated for demanding conditions, ensuring consistent performance even in challenging environments.

Both models feature intuitive user interfaces that simplify setup and operation. They come equipped with large displays and user-friendly navigation, allowing operators to configure settings easily and access critical information without extensive training. Additionally, advanced diagnostic capabilities provide detailed fault records and event logs, enabling effective troubleshooting and maintenance.

In terms of technology, both the ZEK958 and ZEK938 utilize digital signal processing to offer superior precision and reliability. This technology helps to eliminate noise and enhance the accuracy of measurement, a critical aspect in power system protection. Furthermore, they incorporate sophisticated algorithms to differentiate between various types of faults, ensuring that the right corrective action is taken swiftly.

In summary, the GE ZEK958 and ZEK938 digital relays stand out for their robust protection features, versatile communication capabilities, and resilience in challenging conditions. They are engineered for modern electrical systems, combining advanced technology with user-friendly design to meet the demands of utility and industrial applications. With these relays, operators can achieve enhanced reliability, improved efficiency, and greater control over their electrical assets.
Top Page Image Contents