GE ZEK938, ZEK958 Oven racks and convection roasting rack, Stainless steel, Metal parts

Page 37

Care and Cleaning

Wall Oven

BE SURE ELECTRICAL POWER IS OFF AND ALL SURFACES ARE COOL BEFORE CLEANING ANY PART OF THE OVEN.

How to remove protective shipping film and packaging tape

Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film. Remove all of the film before using the appliance for the first time. To assure no damage is done to the finish of the product, the

safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak.

NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.

Oven racks and convection roasting rack

All oven racks and the convection roasting rack may be cleaned by hand with an abrasive cleaner or steel wool. After cleaning, rinse the racks with clean water and dry with a clean cloth. Gray porcelain-coated oven racks (including the offset rack) may remain in the oven during the self-cleaning cycle without being damaged. The convection roasting rack and nickel-plated oven racks (including the offset rack) may remain in the oven during the self-cleaning cycle, but they will lose their luster and become hard to slide. It will be necessary to grease all oven rack side edges with a light coating of vegetable oil after cleaning them by hand or in the oven. This will help maintain the ease of sliding the racks in and out of the oven.

Roasting rack

Oven rack

Offset rack (27models only)

Stainless steel

(If Included)

& metal parts

Do not use a steel-wool pad; it will scratch the surface.

To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.

To inquire about purchasing stainless steel applicance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free number:

National Parts Center

800.626.2002

ge.com

Broiler pan and grid

After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container.

Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dish cloth. Soaking the pan will remove burned-on foods.

Both the broiler pan and grid may be cleaned with a commercial oven cleaner.

Both the broiler pan and grid can also be cleaned in a dishwasher.

Do not clean the broiler pan or grid in a self-cleaning oven.

Do not store a soiled broiler pan and grid anywhere in the oven.

37

Image 37
Contents 27″ and 30″ Convection Wall Oven Introduction ContentsIf you need service Before using your wall ovenWrite down the model & serial numbers If you received a damaged wall oven Save time & moneyImportant Safety Notice SELF-CLEANING Oven Baking or Roasting and Broiling sections Design informationTones Features of your oven control, clock and timerOven Light ON/OFF. Press to turn the oven lights on or off Timer Clock To set the clock Power failureStart pad To reset the timer Using the timerTo cancel the timer Control lockoutTones at the end of a timed cycle Tone volume Special features of your oven controlHour Hour or clock blackout Hour shut off Special Features Sabbath Feature How to set for regular baking or roasting Using the Sabbath FeatureUsing the Sabbath Feature How to exit the Sabbath feature Before you begin… How to set the oven for baking or roastingAluminum foil Preheating and pan placementHI Broil How to set the oven for broilingComments Broiling guide for 27 ″ ovens on some modelsBroiling guide for 30 ″ ovens on some models How to set an immediate start and automatic stop Using the timed baking and roasting featuresHow to set Delayed start and automatic stop Cable Plug Probe Handles Temperature probeProper placement of the probe How to set the oven for roasting when using the probe Fan ConvectionRack BakingConvection roasting Cookware for convection cookingPaper and Plastic Metal and GlassConvection roasting guide How to set the oven for convection baking or roastingPage Using the timed features for convection cooking How to set Delayed start and automatic stop To Crisp Stale Items How to set the oven for warmingHow to set the oven for proofing Do it yourself To adjust the oven thermostatType of margarine will affect baking performance How to set the oven for cleaning Before a clean cycleAfter a clean cycle How to delay the start of cleaningStainless steel Oven racks and convection roasting rackMetal parts Broiler pan and gridTo remove the door Lift-off oven door- removalTo replace the door Removable oven floor Oven doorOven heating elements Control panelProbe Oven light bulbsTo remove To replaceDo not Work Before You Call For Service…After a Clean Trouble- shooting tips Before You Call For Service…Wall Oven Wall Oven We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Consumer Services From the Date Original Purchase Your Monogram Wall Oven Warranty

ZEK938, ZEK958 specifications

The GE ZEK958 and ZEK938 are advanced digital relays designed for protecting and monitoring electrical power systems. These devices are part of GE's broader line of protective relays, which harness cutting-edge technology to ensure reliable performance and robust protection for critical electrical assets.

One of the main features of the GE ZEK958 and ZEK938 is their comprehensive protection capabilities. Both models offer multifunctional protection, including overcurrent, earth fault, and distance protection. They are adept at detecting and isolating potential faults, which can prevent equipment damage and enhance system reliability.

The ZEK958 model is particularly noted for its advanced communication protocols. It supports multiple communication standards, including IEC 61850, DNP3, and Modbus, allowing for seamless integration into modern substation automation systems. This connectivity capability ensures that real-time data can be shared across various systems, facilitating enhanced monitoring and control.

Conversely, the GE ZEK938 is designed for applications that require high-speed tripping and resilience in harsh environments. It caters to the needs of utilities and industries where rapid fault detection is crucial. The ZEK938 features robust housing and is rated for demanding conditions, ensuring consistent performance even in challenging environments.

Both models feature intuitive user interfaces that simplify setup and operation. They come equipped with large displays and user-friendly navigation, allowing operators to configure settings easily and access critical information without extensive training. Additionally, advanced diagnostic capabilities provide detailed fault records and event logs, enabling effective troubleshooting and maintenance.

In terms of technology, both the ZEK958 and ZEK938 utilize digital signal processing to offer superior precision and reliability. This technology helps to eliminate noise and enhance the accuracy of measurement, a critical aspect in power system protection. Furthermore, they incorporate sophisticated algorithms to differentiate between various types of faults, ensuring that the right corrective action is taken swiftly.

In summary, the GE ZEK958 and ZEK938 digital relays stand out for their robust protection features, versatile communication capabilities, and resilience in challenging conditions. They are engineered for modern electrical systems, combining advanced technology with user-friendly design to meet the demands of utility and industrial applications. With these relays, operators can achieve enhanced reliability, improved efficiency, and greater control over their electrical assets.