Miller Electric 301 G manual Description, Weld, Power, And Engine Specifications

SECTION 4 − SPECIFICATIONS

4-1. Description

This multiprocess engine-driven welder and AC generator provides low speed generator AC power and DC weld out- put for quiet, fuel-efficient operation. At 1800 rpm, this unit produces 5 kW/kVA 60 Hz 120/240 Volt AC generator power. Achieve high quality Stick and TIG welding results at either 3000 or 3600 rpm. A special variable frequency (60-120 Hz) receptacle provides 2.4 kW/kVA 120 Volt AC generator power continuously.

4-2. Weld, Power, And Engine Specifications

Welding	Rated	Maximum	Amperage	Voltage	Generator	Fuel
	Welding	Open-Circuit	Range In	Range In			Engine
Mode					Power Rating	Capacity
	Output	Voltage	CC Mode	CV Mode
					5.5 kVA/kW (Peak)
					5 kVA/kW (Continuous)
CC/DC	280 A, 25 V, 100%	72	20 − 300 A		42/21 A,		Kohler CH-20
	Duty Cycle				120/240 V AC,
					60 Hz,		Air-Cooled,
					Single-Phase at	10 gal	Two-Cylinder,
					1800 rpm		Four-Cycle,
				10 − 33 V		(38 L)
							20 HP Gasoline/LP
					And	Tank
							Engine
					2.4 kVA/kW, 20 A,
	300 A, 25 V, 100%						w/Electronic
CV/DC		50	− −		120 V AC,		Governor
	Duty Cycle
					60-120 Hz,
					Single-Phase
					At All Speeds

4-3. Dimensions, Weights, and Operating Angles

	Dimensions
Height	33 in (838 mm)
Width	18-3/4 in (476 mm)
Depth	45-1/2 in (1156 mm)
A	18 in (457 mm)
B	16-1/2 in (419 mm)
C	3/4 in (19 mm)
D	3-1/8 in (79 mm)
E	32-3/4 in (832 mm)
F	45-1/2 in (1156 mm)
G	13/32 in (10 mm) Dia.

Weight

F

A

B

C

D

G

4 Holes

E

Engine End

YDo not exceed tilt angles or engine could be damaged or unit could tip.

YDo not move or operate unit where it could tip.

25°

25° 25°

25°

590 lb (267 kg)

800 426 803 129

OM-4411 Page 10