Miller Electric 301 G manual Changing Engine Oil, Oil Filter, And Fuel Filter, Full Tools Needed

8-5. Changing Engine Oil, Oil Filter, And Fuel Filter

Full

2

1

Tools Needed:

YStop engine and let cool.

1 Oil Drain Valve

2 Oil Filter

Change engine oil and filter accord- ing to engine manual.

YClose valve and valve cap

before adding oil and run- ning engine.

Fill crankcase with new oil to full mark on dipstick (see Section 8-2).

3Fuel Filter

4Fuel Line

Replace line if cracked or worn. Install new filter. Wipe up any spilled fuel.

Start engine, and check for fuel leaks.

YStop engine, tighten connec- tions as necessary, and wipe up fuel.

3

4

803 127 / S-0842

OM-4411 Page 32