6-4. Remote Amperage/Voltage Control
| 1 | Remote Receptacle RC4 |
| Connect optional remote control to | |
| RC4 (see Section | |
| 2 | Remote Hand Control (Optional) |
| 3 | Remote Foot Control (Optional) |
1 | . Engine runs at weld speed when | |
| a device connected to the remote | |
|
| |
|
| receptacle makes closure be- |
|
| tween pins A and B (example: |
|
| trigger pull on MIG gun). |
Example: Combination Remote Amperage Control (Stick) | In Example: |
| Process = Stick (Using Remote On/Off) |
| Min = 40 A CC/DC |
| Max = 180 A CC/DC |
Set V/A Adjust | Set Process | Set |
Switch |
| V/A Control |
3
2
Max (180 A DC)
Min (40 A DC)
Adjust Remote Control
(Stick Welding Only)
.This unit does not have remote con- tactor control. Output is always on.
803 128 / 211 909 /
