GE JTP10GS warranty Questions?, USE this Problem Solver

		QUESTIONS?
	USE THIS PROBLEM SOLVER
PROBLEM		POSSIBLE CAUSE
“F-” AND A		* If the time display Rashes 4’F—” and a number, you have a function error code.
NUMBER FLASH		Press the CLEAWOFF Dad. Nlow the oven to cool for 1 hour. If the function
ON DISPLAY	.
		@rror code repeats, disconnect all power to the range. Call for service.
OVEN WILL		* The circuit breaker in your house has been tripped, or a fuse has been blown,
NOT WORK
OVEN LIGHT DOES		c Bulb may be loose or burned out. Tighten or replace.
NOT WORK		● Electricrd plug must be plugged into alive power outlet.
		* Switch operating oven light is broken. Call for service.

OVEN DOES NOT	* The oven controls are not properly set, See the Broiling section.
ERQ~ PROPERLY	* The door not left ajar as recomrnendd.

●Improper shelf position being used.

●Food is being cooked on a hot pan.

* Cookware is not suited for broiling.

●Aluminum foil used OR the broiler pan grid has not been fhted properly and slit as recommended.

FOOD DOES NOT	* The oven controls are not properly set. See the Baking or Roasting section.
ROAST OR BA~	● Shelf position is not correct.
PROPERLY

*Incorrect cookware of improper she is being used.

*A foil wnt was not used when needed to slow down browning during roasting.

●The oven thermostats needs adjustment. See the Adjusting the Oven Therrn~stat section,

SELF-CLEA~G	* Stop Time must be betw=n 2 to 4 hours l~ter than the Start Time.
OVEN WILL NOT	* Oven temperature is too high to set self-clean operation, Allow the oven to
SELF-CLEAN
	cool and reset the controls.
	● If the self-cleaning mode malfunctions, turn off and disconnect power supply.
	Have serviced by a qualified technician.
SELFACLEAN~G OVEN	* Oven hasn’t cooled to a safe temperature.
DOOR ~L NOT UNLOCK
CONTROL B~PS AFTER	● This is reminding you to enter a bake temperature.
ENTERING COOK ~ME
OR STOP Tm

If you need more help.. call, toll free: GE Answer Center@ 800.626.2000

consumer information service

22