GE Wine Chiller installation instructions Safety Installation Instructions Operating

Page 10

Instructions

Reversing the Door.

Safety

Installation

Instructions

Operating

Instructions

Care and Cleaning

Troubleshooting Tips

Consumer Support

Remove leveling leg and spacer and move to other side

Bottom of wine chiller

Remove right door stop and screws. Install left door stop (packed separately) and screws on other side

Remove leveling leg, screws, bottom hinge and washer, and move to other side

Remove the bottom hinge by removing the screws and leveling leg.

Remove the right door stop and install the left door stop (WR13X10274), packed separately, on the opposite side.

Remove the leveling leg and spacer on the opposite side and install it on the right side.

IMPORTANT: The left leg has a spacer that must be moved to the right side leveling leg when the door swing is reversed.

Install the bottom hinge, with the screws and leveling leg, on the left side.

Stand the wine chiller upright.

Open and close the door, checking the alignment of the door to the cabinet. If necessary, loosen the screws attaching the top hinge to the cabinet, realign the door and retighten the screws.

Place the top cover on the cabinet and reconnect the power connections.

Slide the top cover back in place and replace the two screws. Plug in the wine chiller. Reset the controls to the desired setting.

10

Image 10

Contents Wine Chiller Write the model and serial numbers here Model # Serial #USE of Extension Cords Safety PrecautionsProper Disposal of the Wine Chiller RefrigerantsHOW to Connect Electricity Read and Follow this Safety Information CarefullyRemoving the Packaging Installing the wine chillerInstallation Guidelines Leveling LegsWhen the Wine Chiller is Plugged About the control and settingsLoading the Wine Key-Ejecting Lock About the controls and settingsLocking the Controls Wine Chiller LightCleaning the Inside Care and cleaningCleaning the Outside DefrostingPreparing to Move Event of a Power FailureReplacing the light bulb Electronic controls on the wine chillerReversing the Door Troubleshooting TipsInstructions Safety Installation Instructions Operating Before you call for service… Problem Possible Causes What To DoTemperature that Was just set Temperature pads do Into wine chiller when Door is openedTemperature Wine chiller has odorWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Replace Wine Chiller WarrantyWhat GE Will Not Cover Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design StudioModelo No Serie No Escriba el modelo y los números de serie a continuaciónOperación Solucionar ProblemasPrecauciones DE Seguridad RefrigerantesCómo Conectar LA Electricidad Problemas SolucionarUSO DE Cables DE Extensión InstalaciónLEA Y Siga Cuidadosamente Esta Información DE Seguridad USO DE Enchufes AdaptadoresInstalación Operación Cómo instalar el enfriador de vinos SeguridadAl conectar el enfriador de vinos Acerca de los controles y ajustesCómo cargar el enfriador de vinos Custom Temp adaptar temperatura-EsteLuz del enfriador de vinos Bloqueo de los controlesInstalación Seguro eyector de llave Control automático de la humedadLimpieza del interior Cuidado y limpiezaLimpieza del exterior DescongelaciónEn el evento de una falla de energía Cómo reemplazar la bombillaCómo prepararse para un traslado Cómo invertir el vaivén de la puerta Frente del enfriador de vinosSeguridad Instalación Operación Parte inferior del enfriador de vinosProblema Posibles causas Qué hacer Antes de solicitar un servicio…Problème Cause possible Que faire Notas Operación Instalación SeguridadLo que GE no cubrirá Seguridad InstalaciónDurante GE reemplazará Garantidor General Electric Company. Louisville, KYGarantías ampliadas Soporte al consumidor Página Web de GE AppliancesSolicite una reparación Piezas y accesorios