GE Wine Chiller HOW to Connect Electricity, Read and Follow this Safety Information Carefully

Page 3

www.GEAppliances.com

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

If you have only a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The wine chiller should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your wine chiller by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the wine chiller away from the wall, be careful not to roll over or damage the power cord.

USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada)

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the wine chiller until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Instructions

Installation

Instructions

Operating

Care and Cleaning

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

3

Consumer Support

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Write the model and serial numbers here Model # Serial # Wine ChillerRefrigerants Safety PrecautionsProper Disposal of the Wine Chiller USE of Extension CordsRead and Follow this Safety Information Carefully HOW to Connect ElectricityLeveling Legs Installing the wine chillerInstallation Guidelines Removing the PackagingAbout the control and settings When the Wine Chiller is PluggedLoading the Wine Wine Chiller Light About the controls and settingsLocking the Controls Key-Ejecting LockDefrosting Care and cleaningCleaning the Outside Cleaning the InsideElectronic controls on the wine chiller Event of a Power FailureReplacing the light bulb Preparing to MoveTroubleshooting Tips Reversing the DoorInstructions Safety Installation Instructions Operating Problem Possible Causes What To Do Before you call for service…Wine chiller has odor Into wine chiller when Door is openedTemperature Temperature that Was just set Temperature pads doWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Wine Chiller Warranty GE Will ReplaceWhat GE Will Not Cover Real Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances WebsiteEscriba el modelo y los números de serie a continuación Modelo No Serie NoRefrigerantes Solucionar ProblemasPrecauciones DE Seguridad OperaciónInstalación Problemas SolucionarUSO DE Cables DE Extensión Cómo Conectar LA ElectricidadUSO DE Enchufes Adaptadores LEA Y Siga Cuidadosamente Esta Información DE SeguridadInstalación Operación Seguridad Cómo instalar el enfriador de vinosCustom Temp adaptar temperatura-Este Acerca de los controles y ajustesCómo cargar el enfriador de vinos Al conectar el enfriador de vinosControl automático de la humedad Bloqueo de los controlesInstalación Seguro eyector de llave Luz del enfriador de vinosDescongelación Cuidado y limpiezaLimpieza del exterior Limpieza del interiorCómo reemplazar la bombilla En el evento de una falla de energíaCómo prepararse para un traslado Frente del enfriador de vinos Cómo invertir el vaivén de la puertaParte inferior del enfriador de vinos Seguridad Instalación OperaciónAntes de solicitar un servicio… Problema Posibles causas Qué hacerProblème Cause possible Que faire Operación Instalación Seguridad NotasGarantidor General Electric Company. Louisville, KY Seguridad InstalaciónDurante GE reemplazará Lo que GE no cubriráPiezas y accesorios Soporte al consumidor Página Web de GE AppliancesSolicite una reparación Garantías ampliadas
Top Page Image Contents