GE Wine Chiller Installing the wine chiller, Removing the Packaging, Installation Guidelines

Page 4

Safety Instructions

Installing the wine chiller.

Removing the Packaging

Before using the wine chiller, be sure all packing materials and tape have been removed, including the protective film covering the control and any film protecting the cabinet.

If you are discarding an old refrigeration product, remove the doors to reduce the danger of children being trapped inside.

Installation	Instructions

Installation Guidelines

■The wine chiller can be freestanding or can be installed under the counter, with proper clearances.

■Allow the following clearances for ease of installation, proper air circulation and electrical connections:

Each side	11⁄2″ (38 mm)
Top	2″ (51 mm)
Back	2″ (51 mm)

■Do not install the wine chiller where the temperature will go below 55°F (13°C) or above 90°F (32°C).

■Install it on a level floor.

■Do not install the wine chiller where it will be subject to direct sunlight, heat or moisture.

■Do not store or install this appliance outdoors.

Care and Cleaning

Troubleshooting Tips

Consumer Support

Leveling Legs

Adjustable legs at the front corners of the wine chiller should be set so the wine chiller is firmly positioned on the floor, with a 1/8″ tilt to the back to help the door closure.

To adjust the leveling legs, turn the legs clockwise to raise the wine chiller,

To raise the wine chiller	counterclockwise to lower it.

4

Image 4

Contents Wine Chiller Write the model and serial numbers here Model # Serial #Safety Precautions Proper Disposal of the Wine ChillerUSE of Extension Cords RefrigerantsHOW to Connect Electricity Read and Follow this Safety Information CarefullyInstalling the wine chiller Installation GuidelinesRemoving the Packaging Leveling LegsWhen the Wine Chiller is Plugged About the control and settingsLoading the Wine About the controls and settings Locking the ControlsKey-Ejecting Lock Wine Chiller LightCare and cleaning Cleaning the OutsideCleaning the Inside DefrostingEvent of a Power Failure Replacing the light bulbPreparing to Move Electronic controls on the wine chillerReversing the Door Troubleshooting TipsInstructions Safety Installation Instructions Operating Before you call for service… Problem Possible Causes What To DoInto wine chiller when Door is opened TemperatureTemperature that Was just set Temperature pads do Wine chiller has odorWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Replace Wine Chiller WarrantyWhat GE Will Not Cover Schedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design StudioModelo No Serie No Escriba el modelo y los números de serie a continuaciónSolucionar Problemas Precauciones DE SeguridadOperación RefrigerantesProblemas Solucionar USO DE Cables DE ExtensiónCómo Conectar LA Electricidad InstalaciónLEA Y Siga Cuidadosamente Esta Información DE Seguridad USO DE Enchufes AdaptadoresInstalación Operación Cómo instalar el enfriador de vinos SeguridadAcerca de los controles y ajustes Cómo cargar el enfriador de vinosAl conectar el enfriador de vinos Custom Temp adaptar temperatura-EsteBloqueo de los controles Instalación Seguro eyector de llaveLuz del enfriador de vinos Control automático de la humedadCuidado y limpieza Limpieza del exteriorLimpieza del interior DescongelaciónEn el evento de una falla de energía Cómo reemplazar la bombillaCómo prepararse para un traslado Cómo invertir el vaivén de la puerta Frente del enfriador de vinosSeguridad Instalación Operación Parte inferior del enfriador de vinosProblema Posibles causas Qué hacer Antes de solicitar un servicio…Problème Cause possible Que faire Notas Operación Instalación SeguridadSeguridad Instalación Durante GE reemplazaráLo que GE no cubrirá Garantidor General Electric Company. Louisville, KYSoporte al consumidor Página Web de GE Appliances Solicite una reparaciónGarantías ampliadas Piezas y accesorios