GE ZGU36, JGP630, JGP970 warranty Check Igniters, Burner Ignition, Burner Flames, Burner Grates

Page 11

Installation Instructions

2 CHECK IGNITERS

Operation of the electric igniters should be checked after the cooktop and supply line have been carefully checked for leaks and the cooktop has been connected to the electrical power.

On models so equipped, check to be sure the cooktop is in the UNLOCKED position.

APush and turn a burner valve to the LITE position. All spark igniters will make a series of sparks (ticking sounds), but only the burner turned to LITE will light.

The burner should light when gas is available to the burner.

Once the burner lights, it should be turned out of the LITE position.

BTry each valve separately until all burners have been checked.

3 BURNER IGNITION

Cooktop Spark Ignition—When you turn the cooktop knob to LITE, the spark igniter makes a series of electric sparks (ticking sounds) which light the burner. During a power failure, the burners will not light automatically. In an emergency, a cooktop burner may be lit with a match by following the steps below.

WARNING: Lighting gas burners with a match is dangerous. You should match light the cooktop burners only in an emergency.

On models so equipped, check to be sure the cooktop is in the UNLOCKED position.

ALight a match and hold the flame near the burner you want to light. Wooden matches work best.

BPush in and turn the control knob slowly. Be sure you are turning the correct knob for the burner you are lighting.

NOTE: If the burner does not light within five seconds, turn the knob off and wait one minute before trying again.

4 THE BURNER FLAMES

Turn each burner on. Flames should be blue in color with no trace of yellow. The burner flames should not flutter or blow away from the burner. The flame should be no less than 1/4on the lowest setting and no greater than 1-1/2on highest setting.

1/4to

 

 

 

 

 

Cooktop Burner

 

 

 

1-1/2

 

 

 

 

 

 

 

 

 

 

 

Burners should be checked frequently

WARNING: If you attempt to measure the flame, please use caution. Burns could result.

5 BURNER GRATES

The three cooktop grates are designed for specific positions. For maximum stability, these grates should only be used in their proper position: they should not be interchanged. For your convenience, the undersides of the left and right grates are marked “OUTSIDE” and “INSIDE”. Make sure that the side marked “OUTSIDE” is on the outer edge of your cooktop. Make sure that the tabs on either side of the center grate fit into the slots located on the “INSIDE” edge of the side grates.

 

“INSIDE”

 

edges

“OUTSIDE”

“OUTSIDE”

edge

edge

Tab

Tab

11

Image 11
Contents Before YOU Begin For Your SafetyImportant Save these Commonwealth of MassachusettsParts Included Important Safety InstructionsTools YOU will Need For Installation Electrical RequirementsPRE-INSTALLATION Checklist Generated by Cooktop Maintain the Following Minimum Clearance DimensionsCutout Dimensions of Countertop Preparing the OpeningInstalling the Cooktop Unit Complete Connection with a Coupling INSTALLATION-GAS ConnectionsInstall Regulator Onto the inlet end Pressure regulator Install the couplingCheck for Leaks Installation Over BUILT-IN OvenTWO-PRONG Wall Receptacle INSTALLATION-ELECTRICAL ConnectionsExtension Cords Electrical Supply and OutletTemporary Method Adaptor plugs not permitted in Canada Assembling the Cooktop Burners Cooktop BurnersBurner Grates Check IgnitersBurner Ignition Burner FlamesOperation Checklist Tools YOU will Need For LP Conversion Safety Information YOU should KnowAdjust Your Cooktop for USE with LP GAS Making the LP ConversionChange Cooktop Burner Orifices 10 in.-lbs torque 18,000 BTU/HR Burner on some modelsLeft Front Right Front Model Flame Recheck Adjust Burner FlamesTesting Flame Stability CI QUE Vous Devez Faire SI Vous Sentez LE GAZ Important Vous devezAvant DE Commencer Pour Votre SécuritéBesoins D’ÉLECTRICITÉ Instructions Importantes DE SécuritéPièces Comprises Matériaux Dont Vous Pouvez Avoir BesoinListe DE Vérification Avant Installation ’ALIMENTATION DE GAZ À Dimensions DU Découpage DE LA Table DE CuissonDimensions Totales DE LA Table DE Cuisson Préparation DE L’OUVERTUREProtégez LA Surface DE LA Table DE Cuisson Installation DE LA Table DE CuissonTrouvez LES Pièces DE Montage Fixez LES Supports DE Fixation À LA Table DE CuissonTerminez LE Raccordement Avec UN Raccord INSTALLATION-BRANCHEMENT DU GAZInstallez LE Régulateur Vérifiez QU’IL N’Y a PAS DE Fuite Installation SUR UN Four EncastréPrise Biphasée INSTALLATION-RACCORDS ÉlectriquesRallonges Alimentation Électrique ET PriseMise EN Garde Si vous fixez INSTALLATION-RACCORDS Électriques SuiteAssemblez LES Brûleurs DE LA Table DE Cuisson Brûleurs DE LA Table DE CuissonAllumage DES Brûleurs Avertissement Il estVérifiez LES Allumeurs LES Flammes DU Brûleur Brûleurs DE LA Table DE Cuisson SuiteListe DE Vérification DE Fonctionnement Avertissement Si vousOutils Nécessaires À LA Conversion AU GAZ Propane Conversion AU GAZ PropaneAvertissement Cette Ajustez Votre Plaque DE Cuisson À UN Usage AU GAZ PropaneConversion AU GAZ Propane Suite Diaphragme Modèle Brûleur de 18,000 BTU/HRNouvelle vérification des flammes Ajustez LES Flammes DES BrûleursEssai de stabilité de la flamme

ZGU36, JGP970, JGP630 specifications

The GE JGP630, JGP970, and ZGU36 are three outstanding gas cooktops that offer a blend of innovation, practicality, and style for modern kitchens. Each model includes unique features and technologies catering to various cooking needs and preferences.

The GE JGP630 is a gas cooktop designed for simplicity and efficiency. It boasts four sealed burners, allowing for greater heat control and easy cleanup. The burners range from a high-output burner for quick boiling to a low simmer burner for delicate sauces, ensuring versatility. One of the standout features is the continuous grates, which provide a stable surface for cookware and make it easy to move pots and pans between burners. Additionally, the JGP630 features a stainless steel finish, giving it a sleek and modern look that fits well with any kitchen décor.

The GE JGP970 takes functionality a step further with its advanced features and technology. This model is equipped with five burners, including a powerful 20,000 BTU burner, perfect for rapid cooking and multitasking. The JGP970 also includes an integrated griddle, allowing users to prepare breakfast items like pancakes and bacon without needing additional cookware. One of its notable technologies is the precise simmer burner, which maintains low heat for simmering sauces and stews while maintaining control over the cooking process. The easy-to-clean, dishwasher-safe grates add an extra layer of convenience, making maintenance a breeze.

Lastly, the GE ZGU36 offers a premium cooking experience with its professional-grade features. This model is equipped with a large 36-inch cooktop area and six burners, providing ample cooking space for large meals. One of the key characteristics of the ZGU36 is its adjustable burner settings, allowing for a customized cooking experience that caters to both high-heat searing and low-heat simmering. The cooktop also features heavy-duty, low-profile grates, which contribute to a sophisticated look while ensuring stability for all types of cookware. With its precise temperature control and durable construction, the ZGU36 is perfect for avid home chefs looking for high performance.

In summary, the GE JGP630, JGP970, and ZGU36 offer exceptional features and technologies tailored to different cooking styles. With varying numbers of burners, unique cooking capabilities, and modern aesthetics, these cooktops are designed to cater to the needs of every kitchen. Whether you are a casual cook or a culinary enthusiast, GE provides gas cooktops that enhance your cooking experience with style and functionality.