Installation Preparation, Power supply locations

Installation Preparation

G a s Updraf t Cooktop

Power supply locations

Gas supply:

These cooktops are designed to operate on natural gas at 4" of water column pressure or on LP gas at 10" of water column pressure.

–These cooktops are shipped from the factory set for natural gas. If you decide to use this cooktop with LP gas, conversion adjustments must be made by a service technician or other qualified person. JXLP56 conversion kit is required for

LP operation.

•The pressure regulator must be connected in series with the manifold of the cooktop and must remain in series with the supply line regardless of type of gas being used.

For proper operation, the maximum inlet pressure to the regulator must be no more than 10" water column pressure for natural gas and 14" water column pressure for LP gas.

•When checking the regulator, the inlet pressure must be at least 1" greater than the regulator output setting.

–If the regulator is set for 4" of water column pressure, the inlet pressure must be at least 5".

–If the regulator is set for 10" of water column pressure, the inlet pressure must be at least 11".

For ease of installation, and if local codes permit, the gas supply line into the cooktop should be 1/2" or 3/4" ID flexible metal appliance connector, three to five feet long. Note: Purchase new flexible line. DO NOT USE OLD, PREVIOUSLY USED FLEXIBLE LINE.

•Make gas connection through rear wall, or on cabinet floor at rear, as illustrated.

2" Min.
Below
Bottom
of	1-5/8"
Counter	From
	Right of
	Cutout

5/8" Forward of Back of Cutout

Electrical supply:

This cooktop features pilotless electric ignition for energy savings and reliability. It operates on a 120 volt, 60 Hz power supply. A separate circuit, protected by a 15 amp time delay fuse or circuit breaker, is required.

•A properly-grounded 3-prong receptacle should be located within reach of cooktop’s four foot power cord.

IMPORTANT: (Please read carefully).

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

The power cord of this appliance is equipped with a three-prong (grounding) plug which mates with a standard three-prong grounding wall receptacle to minimize the possibility of electric shock hazard from this appliance. The customer should have the wall receptacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded and has correct polarity.

Where a standard two-prong wall receptacle is encountered, it is the personal responsibility and obligation of the customer to have it replaced with a properly grounded three- prong wall receptacle.

Do Not, Under Any Circumstances, Cut Or Remove The Third (ground) Prong From The Power Cord.

Do not use an extension cord.

ZGU3650 specifications

The GE ZGU3650 is a versatile and advanced generator set that has gained significant recognition in the energy sector. Designed to deliver reliable power for various applications, the ZGU3650 is particularly notable for its robust performance, efficiency, and cutting-edge technology.

One of the main features of the GE ZGU3650 is its high power output capability. With a capacity of up to 3650 kVA, it is designed to cater to large industrial and commercial requirements, making it ideal for critical infrastructure projects, data centers, and manufacturing facilities. This generator set can operate on various fuel types, including diesel and natural gas, providing flexibility and adaptability to different operational environments.

The ZGU3650 is equipped with advanced control systems that enhance its efficiency and operational reliability. It incorporates GE's next-generation digital control technology, allowing for real-time monitoring and control of the generator's performance. This feature ensures optimal fuel consumption while maximizing output, which not only reduces operational costs but also minimizes environmental impact.

Another standout characteristic of the ZGU3650 is its sound-attenuated enclosure. This design significantly lowers noise levels, making it suitable for use in urban or noise-sensitive environments. The generator also boasts a robust cooling system that maintains optimal operating temperatures, ensuring longevity and reducing maintenance costs.

The generator set is designed with safety as a paramount concern. It includes integrated protection features such as overload protection, short circuit protection, and fault monitoring. These systems work in conjunction to safeguard both the generator and connected load, enhancing reliability during operation.

In addition to these features, the GE ZGU3650 is built for ease of serviceability. The layout of components is designed to facilitate maintenance, with easy access to vital parts. This design consideration helps to minimize downtime, ensuring that equipment remains operational when needed.

With its combination of high power output, advanced control systems, noise reduction, and safety features, the GE ZGU3650 stands out as a leading choice for organizations that require dependable and efficient power solutions. Whether for emergency backup, prime power, or continuous operation, this generator set delivers performance that meets the demands of various industries while prioritizing sustainability and operational efficiency.