GE L0523252 installation instructions Istep 161 Dishwasher WET Test, Replace Toekick, Literature

Page 12

Installation Instructions

ISTEP 161 DISHWASHER WET TEST

[] Turn on power supply (or plug power cord into outlet, if equipped).

[] Turn dial to Normal "Wash" position.

[] Close door.

[] Check to be sure that water enters the dishwasher.

If water does not enter the dishwasher, checkto be sure that water and power are turned on.

[] Check for leaks under the dishwasher. If a leak is found, turn power supply off, then tighten connec- tions. Restore power after leak is corrected.

[] Check for leaks around the door. A leak around the door could be caused by door rubbing or hitting against adjacent cabinetry. Reposition the dish- washer if necessary. See Step 9.

[] The dishwasher will drain and turn off about 5 to 7 minutes after the first fill. Check drain lines.

If leaks are found, turn power off atthe breaker and correct plumbing as necessary. Restore power after corrections are made. See Step 12.

[] Open dishwasher door and make sure most of the water has drained. If not, check that disposer plug has been removed and/or air gap is not plugged.

See Step 13. Also check drain line for kinking.

[] Run the dishwasher through another fill and drain cycle. Check for leaks and correct if required.

[] Atthe end of drain, open door and turn dial to OFFposition.

STEP 17 REPLACE TOEKICK

oio

oekick

Adjust_

or Down

FigureZ

Place 2-piece toekick againstthe legs of the dishwasher.

Place the inner toekick piece (with slots) against the toekick bracket. The slots should align with toekick bracket screw holes. Allow the toekick to touch the floor.

Place larger toekick over the inner piece and install 4 toekick screws.

Use additional 2 screws for installations over 33-1/2" high.

Use both toekick pieces for all installation heights.

I STEP 181 LITERATURE

Be sure to leave complete literature package and installation instructions with consumer.

Pub.No.31-30566

SPECIFICATIONSSUBJECTTOCHANGEWITHOUTNOTICEDwg.No.206C1559P106

Printedin China 07-03JR

Page 11 Page 12
Image 12
Page 11 Page 12
Contents Read Carefully Keep These Instructions Read and observe all Cautions and WarningsInstallation Preparation Parts SuppliedMaterials YOU will Need Tools YOU will NeedPrepare Dishwasher Enclosure Drain RequirementsBeEvenwith Plumbingand ElectricSenlice RoomFloor. Must EnterShadedAreaPrepare Electrical Wiring Installation To install the dishwasher. If it isInstructions Prepare HOT Water LineInstallation Instructions Adjust Leveling LegsInstall Power Cord Install 90 ElbowIstep 61 Position Water Line and House Wiring Istep 81 Slide DishwasherPartially Into Cabinet Istep 71 Insert Drain Hose Through CabinetISTEP101LEVEL Dishwasher Istep 91 Position Dishwasher Under CountertopIstep 111SECURE Dishwasher To CabinetDrain Line Installation Istep 131 Connect Drain LineIstep 141 Connect Power PRE-TEST ChecklistSupply Istep 161 Dishwasher WET Test Replace ToekickLiterature

L0523252 specifications

The GE L0523252 is a cutting-edge product designed for efficiency and reliability in various applications. It stands out in the market due to its innovative features and advanced technologies, making it a top choice for professionals and industries alike.

One of the most notable characteristics of the GE L0523252 is its robust design. Built with high-quality materials, it ensures durability and longevity, even in challenging environments. This reliability is further enhanced by the stringent quality control measures that GE implements during manufacturing, allowing users to trust the performance of their product under different conditions.

The GE L0523252 integrates advanced technologies that contribute to its overall performance. One such feature is its optimized power management system, which maximizes energy efficiency while minimizing waste. This not only helps reduce operational costs but also aligns with global sustainability efforts by lowering the carbon footprint associated with its use.

In terms of functionality, the GE L0523252 offers a versatile range of applications. It is designed for seamless integration into existing systems, making it ideal for industries such as manufacturing, energy, and automation. Its adaptability ensures that it meets the diverse needs of various sectors, from small enterprises to large-scale operations.

Another key aspect of the GE L0523252 is its user-friendly interface. With intuitive controls and easy setup procedures, users can quickly familiarize themselves with the system. This focus on ease of use enhances productivity by reducing downtime and the need for extensive training.

Safety is a paramount concern in any industrial application, and the GE L0523252 addresses this with built-in safety features. These include overcurrent protections and thermal management systems, which safeguard the equipment from potentially damaging conditions. This commitment to safety enhances the overall value of the product in the eyes of consumers.

Furthermore, the GE L0523252 is backed by comprehensive customer support services. GE provides users with expert guidance and assistance throughout the product lifecycle, ensuring that any issues can be addressed promptly. This support network emphasizes GE's commitment to customer satisfaction and peace of mind.

In conclusion, the GE L0523252 is a product characterized by its durability, efficiency, and versatility. With state-of-the-art technologies and a focus on safety, it stands as a testament to GE's dedication to innovation in the industrial sector. Whether for energy management, automation, or manufacturing, this product proves to be an exceptional choice for those seeking reliable and efficient solutions.
Top Page Image Contents