Prepare Electrical Wiring

Installation Preparation

FORPERSONAL SAFETY:Remove house

fuse or open circuit breaker before WARNINGbeginning installation. Do not use an extension cord or adapter plug with this

appliance.

Electrical Requirements

•This appliance must be supplied with 120V,60 Hz., and connected to an individual properly grounded branch circuit, protected by a 15or 20 ampere circuit breaker or time delay fuse.

•Wiring must be 2wire with ground.

•If the electrical supply does not meetthe above requirements, call a licensed electrician before proceeding.

Grounding Instructions - Cable Direct

This appliance must be connected to a grounded metal, permanentwiring system, or an equipment grounding conductor must be run with the circuit conductors and be connected to the equipment grounding terminal or lead on the appliance.

Grounding Instructions - Power Cord Models

This appliance must be grounded, In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electric current, The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with local codes and ordinances.

WARNING

The improper connection of the

equipment grounding conductor can result in a risk of electric shock. Check

with a qualified electrician or service representative if you are in doubt that the appliance is properly grounded,

	I	I	\
_	/ ,'Ti	I	\ \
	I	I	\
		1-1/2" Dia.
		Hole(Max.)
			from
			Cabinet

FigureE

White

Cabinet Preparation & Wire Routing

•The wiring may enter the opening from either side, rear or the floor within the shaded area.

•Cut a 1-1/2"max, dia, hole to admit the electrical cable. The hole must be free of sharp edges. If the cabinet wall is metal, the hole edge must be covered with a bushing.

•Cable direct connections may pass through the same hole asthe drain hose and hotwater line, if convenient. If cabinetwall is metal, the hole edge must be covered with a bushing. NOTE: Power cords with plug must pass through a separate hole.

Electrical Connection to Dishwasher

Electrical connection is on the right front of dishwasher.

•For cable direct connections the cable must be routed as shown in Figure E. Cable must extend a minimum of 24"from the rear wall.

•For power cord connections, install a 3-prong ground- ing type receptacle. The power-supply receptacle for the appliance shall be installed in a cabinet or on a wall adjacent to the undercounter space in which the appliance is to be installed.

L0523252 specifications

The GE L0523252 is a cutting-edge product designed for efficiency and reliability in various applications. It stands out in the market due to its innovative features and advanced technologies, making it a top choice for professionals and industries alike.

One of the most notable characteristics of the GE L0523252 is its robust design. Built with high-quality materials, it ensures durability and longevity, even in challenging environments. This reliability is further enhanced by the stringent quality control measures that GE implements during manufacturing, allowing users to trust the performance of their product under different conditions.

The GE L0523252 integrates advanced technologies that contribute to its overall performance. One such feature is its optimized power management system, which maximizes energy efficiency while minimizing waste. This not only helps reduce operational costs but also aligns with global sustainability efforts by lowering the carbon footprint associated with its use.

In terms of functionality, the GE L0523252 offers a versatile range of applications. It is designed for seamless integration into existing systems, making it ideal for industries such as manufacturing, energy, and automation. Its adaptability ensures that it meets the diverse needs of various sectors, from small enterprises to large-scale operations.

Another key aspect of the GE L0523252 is its user-friendly interface. With intuitive controls and easy setup procedures, users can quickly familiarize themselves with the system. This focus on ease of use enhances productivity by reducing downtime and the need for extensive training.

Safety is a paramount concern in any industrial application, and the GE L0523252 addresses this with built-in safety features. These include overcurrent protections and thermal management systems, which safeguard the equipment from potentially damaging conditions. This commitment to safety enhances the overall value of the product in the eyes of consumers.

Furthermore, the GE L0523252 is backed by comprehensive customer support services. GE provides users with expert guidance and assistance throughout the product lifecycle, ensuring that any issues can be addressed promptly. This support network emphasizes GE's commitment to customer satisfaction and peace of mind.

In conclusion, the GE L0523252 is a product characterized by its durability, efficiency, and versatility. With state-of-the-art technologies and a focus on safety, it stands as a testament to GE's dedication to innovation in the industrial sector. Whether for energy management, automation, or manufacturing, this product proves to be an exceptional choice for those seeking reliable and efficient solutions.