Maytag W10237807A, W10216883A installation instructions Base Grille Water Filtration System

Page 15

Base Grille Water Filtration System

Model P2WG2L/P2RFWG2 Capacity 200 Gallons (757 Liters)

Model P2WG2/P2RFWG2 Capacity 200 Gallons (757 Liters)

System tested and certified by NSF International against NSF/ANSI

Standard 42 for the reduction of Chlorine Taste and Odor, Particulate

Class I*; and against NSF/ANSI Standard 53 for the reduction of Lead,

Mercury, Benzene, Toxaphene, and O-dichlorobenzene.

This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42 and 53.

Substance Reduction

NSF Reduction

Average

Influent Challenge

Maximum

Average

Minimum %

Average %

Aesthetic Effects

Requirements

Influent

Concentration

Effluent

Effluent

Reduction

Reduction

 

 

 

 

 

 

 

 

Chlorine Taste/Odor

50% reduction

1.909 mg/L

2.0 mg/L ± 10%

0.05 mg/L

<0.05 mg/L

>97.4

>97.4

Particulate Class I*

85% reduction

9700000 #/mL

At least 10,000 particles/mL

2600 #/mL**

62000 #/mL

>97.6

>99.4

Contaminant

NSF Reduction

Average

Influent Challenge

Maximum

Average

Minimum %

Average %

Reduction

Requirements

Influent

Concentration

Effluent

Effluent

Reduction

Reduction

Lead: @ pH 6.5

0.010 mg/L

143.33 ug/L

0.15 mg/L ± 10%

1.0 ug/L

1.0 ug/L

>99.3

>99.3

Lead: @ pH 8.5

0.010 mg/L

140 ug/L

0.15 mg/L ± 10%

1.0 ug/L

1.0 ug/L

>99.3

99.3

Mercury: @ pH 6.5

0.002 mg/L

0.0058 mg/L

0.006 mg/L ± 10%

0.3 ug/L

0.0002 mg/L

>96.5

96.5

Mercury: @ pH 8.5

0.002 mg/L

0.00646 mg/L

0.006 mg/L ± 10%

1.4 ug/L

0.0004 mg/L

76.3

88.1

Benzene

0.005 mg/L

0.015 mg/L

0.015 mg/L ± 10%

0.5 ug/L

0.0005 mg/L

>96.5

>96.5

O-Dichlorobenzene

0.6 mg/L

1.83333 mg/L

1.8 mg/L ± 10%

4.8 ug/L

0.014 mg/L

99.7

99.9

Toxaphene

0.003 mg/L

0.016 mg/L

0.015 mg/L ± 10%

1 ug/L

0.001 mg/L

>93.2

>93.2

Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.85 gpm (3.2 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 68°F to 71.6°F (20°C to 22°C). Rated service capacity = 200 gallons (757 liters).

It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to perform as advertised.

Use replacement filter P2RFWG2, part #4396841.

2008 suggested retail price of $39.99 U.S.A./$54.95 Canada. Prices are subject to change without notice.

Model P2WG2L/P2WG2: Style 1 – When the filter indicator reads 10%, order a new filter. When the indicator reads 0%, it is recommended that you replace the filter.

Style 2 – When the filter indicator changes from green to yellow, order a new filter. When the indicator changes from yellow to red, it is recommended that you replace the filter.

Style 3 – When the water filter status display changes from “GOOD” to “ORDER,” order a new filter. When the filter indicator reads “REPLACE,” it is recommended that you replace the filter.

Style 4 – Press FILTER to check the status of your water filter. If the filter indicator light is yellow, order a new filter. If the filter indicator light is red, it is recommended that you replace the filter.

Change the water filter cartridge every 6 months. If the water flow to the water dispenser or ice maker decreases noticeably before 6 months have passed, replace the water filter cartridge more often.

These contaminants are not necessarily in your water supply. While testing was performed under standard laboratory conditions, actual performance may vary.

The product is for cold water use only.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Refer to the “Warranty” section for the Manufacturer’s name, address and telephone number.

Refer to the “Warranty” section for the Manufacturer’s limited warranty.

Application Guidelines/Water Supply Parameters

Water Supply

City or Well

Water Pressure

30 - 120 psi (207 - 827 kPa)

Water Temperature

33° - 100°F (0.6° - 37.8°C)

Service Flow Rate

0.85 gpm (3.2 Lpm) @ 60 psi

*Class I particle size: >0.5 um to <1 um

**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust. ® NSF is a registered trademark of NSF International.

15

Image 15
Contents Refrigerator User Instructions Refrigerator SafetyInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer Recommended Grounding Method Location RequirementsElectrical Requirements Water Supply RequirementsConnect to Water Line Connect Water SupplyWater Pressure Reverse Osmosis Water SupplyUsing the Controls Complete the InstallationRefrigerator USE Crisper Humidity Control Chilled Door BinWater and Ice Dispensers To Dispense Ice Water DispenserTo Dispense Water Ice DispenserWater Filtration System CleaningRefrigerator Care Ice Maker and Storage BinTroubleshooting Changing the Light BulbsRefrigerator Operation Ice and Water Temperature and MoistureDispenser water is not cool enough on some models AccessoriesIce dispenser will not operate properly Water is leaking from the dispenserWater Filter Certifications Base Grille Water Filtration System Performance Data SheetsBase Grille Water Filtration System Base Grille Water Filtration System Base Grille Water Filtration System Disclaimer of Implied Warranties Maytag Major Appliance WarrantyLimited Warranty Items Excluded from WarrantySécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions DinstallationExigences demplacement Déballage du réfrigérateurPression de leau Méthode recommandée de mise à la terreSpécifications électriques Spécifications de l’alimentation en eauRaccordement de la canalisation deau Raccordement à une canalisation d’eauRaccordement au réfrigérateur Style Utilisation DU Réfrigérateur Utilisation des commandesAchever l’installation Ajustement des commandesCONDITION/RAISON Ajustement Commande du compartiment fraîcheur dans la porteCompartiment fraîcheur dans la porte Désactivation des signaux sonoresLe distributeur de glaçons Distributeurs d’eau et de glaçons sur certains modèlesLe distributeur deau Distribution d’eauLe verrouillage du distributeur sur certains modèles Pour retirer et réinstaller le bac à glaçonsMachine à glaçons et bac dentreposage La lampe du distributeur sur certains modèlesNettoyage Remplacement du filtre à eauEntretien DU Réfrigérateur Système de filtration de leauLe réfrigérateur ne fonctionne pas Remplacement des ampoules d’éclairageDépannage Fonctionnement du réfrigérateurLa température est trop élevée Température et humiditéLes portes ne ferment pas complètement Les portes sont difficiles à ouvrirLe distributeur de glaçons ne fonctionne pas correctement Glaçons et eauLes glaçons sont creux ou petits Goût, odeur ou couleur grise des glaçonsAccessoires Le distributeur deau ne fonctionne pas correctementDe leau suinte du distributeur Système de filtration deau de la grille de la base Feuilles DE Données SUR LA PerformanceSystème de filtration deau de la grille de la base 909 mg/L Mg/L ± 10 % 05 mg/L 97,4 Particules classe 4200 #/mL 1900 #/mL 99,9 Garantie DE Gros Appareil Ménager Maytag Garantie LimitéeÉléments Exclus DE LA Garantie W10216883A SP PN W10237807A

W10237807A, W10216883A specifications

Maytag has long been synonymous with durability and innovation in the appliance industry, and their components, such as the W10216883A and W10237807A, exemplify the brand's commitment to quality and efficiency. These parts are designed to enhance the performance of Maytag appliances, offering reliability that consumers have come to expect.

The Maytag W10216883A is primarily known as a door seal that fits various Maytag models. This component plays a critical role in maintaining the efficiency of refrigerators by preventing cold air from escaping and minimizing the workload on the appliance's cooling system. The high-quality construction of the seal ensures it can withstand daily use while effectively preventing leaks, leading to energy savings and a more consistent internal temperature. Its easy installation process allows homeowners to replace this part without the need for professional help, ensuring that their refrigerator continues to operate as intended for years.

On the other hand, the Maytag W10237807A is a water filter that provides an essential function in maintaining clean and fresh drinking water. This filter reduces contaminants, including chlorine taste and odor, ensuring that the water dispensed from the refrigerator is safe and pleasant to drink. The W10237807A features advanced filtration technology that targets impurities while preserving beneficial minerals. Regular replacement of this water filter is crucial, as it guarantees that the water quality remains high and supports the overall health of the household.

Both components reflect Maytag's focus on integrating modern technologies to enhance user experience. The durable materials used in the construction of these parts ensure they can withstand the rigors of daily use, while innovative designs allow for easy installation and replacement.

Additionally, these Maytag parts contribute to the overall longevity of appliances, ensuring that customers get the most value from their investments. With consumer-friendly features and reliable performance, the W10216883A and W10237807A truly embody the brand's dedication to superior quality and efficiency in home appliances. By choosing genuine Maytag components, homeowners can maintain optimal performance and prolong the life of their appliances.