Samsung FER300SB, FER300SXPKG HOW to SET the Appliance for Surface Cooking, Hot surface indicator

Page 17

Location of the radiant surface elements and controls

The radiant control knobs operate the radiant surface elements on the cooktop as shown below.

Dual

Single

Single

Dual

Left Front

Left Rear

Right Rear

Right front

Element

Element

Element

Element

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hot surface indicator

• Comes on when the unit is turned on or hot to the touch.

• Stays on even after the unit is turned off.

• Glows until the unit is cooled to approximately 150°F.

Cooking areas

•The cooking areas on your range are identified by permanent circles on the glass cooking surface. For the most efficient cooking, fit the pan size to the element size.

•Pans should not extend more than ½” to 1” beyond the cooking area.

•When a control is turned on, a glow can be seen through the glass cooking surface. The element will cycle on and off to maintain the preset heat setting, even at high settings.

•For more information on selecting proper types of cookware, refer to the section “Using the proper cookware” on page 17.

HOW TO SET THE APPLIANCE FOR SURFACE COOKING

• The surface elements may be hot and burns may occur. Do not touch surface elements until they have cooled down sufficiently.

•At high or medium-high settings, never leave food unattended. Boilovers cause smoking and greasy spillovers may catch on fire.

•Be sure you turn the control knob to OFF when you finish cooking.

•The area between the high and off settings, are not appropriate for cooking.

Single surface unit control knob (left rear, right rear)

1. Push the knob in.

2. Turn in either direction to the setting you want.

• At both the off and high settings, the knob clicks into position.

Surface cooking _16

SURFACE COOKING

FE-R300_XAA_DG68-00277A-08_EN.indd 16

2013-06-11 �� 12:36:57

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Electric Range Important safety instructions Features of your new rangeSafety precautions Personal injury when using your oven, follow these basicANTI-TIP Device Hazards or unsafe practices that may result in minorFor Your Safety Do not enter inside the oven Surface Cooking Units Ventilating Hood OvenBefore YOU Begin SELF-CLEANING OvensGLASS/CERAMIC Cooking Surfaces Important safety instructions Features of your new range Important safety instructions Features of your new range State of California Proposition Contents WHAT’S Included with Your Range Introducing your new rangeOverview About the radiant surface elements Surface cookingAbout Surface Cooking Hot surface indicator HOW to SET the Appliance for Surface CookingLocation of the radiant surface elements and controls Cooking areasDual surface unit control knob left front, right front Using the Proper CookwareProtecting the Smoothtop Surface Choosing the Proper CookwareOven Control Panel Operating the ovenSetting the Kitchen Timer Setting the ClockHow to set the clock How to change between a 12-hour and 24-hour displayUsing the Oven Racks Minimum and Maximum SettingsBefore using the racks Oven rack positionsHow to adjust the thermostat while cooking How to set the thermostatHow to set the oven for timed cooking BakingHow to set the oven for delay timed cooking Delay Timed CookingBroiling How to set the oven for broilingBroil stop position Recommended broiling guideSlow Cook Using the Easy Cook FeatureChicken Nuggets ProofUsing the Warm Function Using the Custom Cook FeatureHow to record a recipe setting How to recall a settingFahrenheit or Celsius temperature selection Extra FeaturesThermostat adjustment Hour energy savingControl lockout Sound on/offFor use on the Jewish Sabbath & Holidays Setting the SabbathMaintaining your appliance SELF-CLEANINGBefore a self-cleaning cycle How to delay the start of self-cleaning How to set the oven for self-cleaningHow to turn off the self-cleaning feature After a self-cleaning cycleAfter a steam-cleaning cycle STEAM-CLEANINGHow to set the oven for steam-cleaning Cleaning painted parts and decorative trim Care and Cleaning of the OvenCleaning stainless steel surfaces Cleaning the broil pan and insertNormal daily use cleaning Care and Cleaning of the Glass CooktopOven racks Oven doorCleaning sugary spills and melted plastic Cleaning the cooktop sealRemoving heavy, burned-on residue Removing metal marks and scratchesRemoving and Replacing the Storage Drawer Removing and Replacing the Oven DoorChanging the Oven Light Troubleshooting TroubleshootingDiscoloration on AreasCooktop Frequently cycles onSelf-clean Temperature is tooCleaning cycle Not open after a Self-cleaning cycleSteam from the vent Oven not clean afterBurning or oily odor Emitting fromLimited Warranty to Original Purchaser WarrantyCode No. DG68-00277A-08

FER300SB, FER300SX, FER300SBPKG, FER300SW, FER300SWPKG specifications

The Samsung FER300 series of refrigerators, comprising models such as FER300SXPKG, FER300SWPKG, FER300SW, FER300SBPKG, and FER300SX, represents a notable advancement in refrigeration technology. These refrigerators are designed with a blend of functionality, style, and energy efficiency, making them suitable for modern households.

One of the main features of the Samsung FER300 series is its spacious interior design. The refrigerators offer optimized storage solutions with adjustable shelves, allowing users to customize the layout according to their needs. This flexibility ensures that items of various shapes and sizes can be accommodated effortlessly. Additionally, the series includes multiple compartments, including crisper bins for fruits and vegetables, which help to preserve the freshness of produce for extended periods.

A key technological highlight of the FER300 series is the Digital Inverter Compressor. This technology automatically adjusts the compressor speed in response to cooling demand. As a result, these refrigerators operate more quietly and efficiently compared to traditional models. This not only enhances energy efficiency but also contributes to reduced wear and tear, leading to a longer lifespan for the appliance.

The refrigerators in the FER300 series also feature advanced cooling technologies, such as Multi-Air Flow. This system ensures that cold air is evenly distributed throughout the interior, minimizing temperature fluctuations and ensuring consistent cooling for all items within the fridge. This feature is particularly beneficial for maintaining the freshness of perishable goods.

Energy efficiency is another standout characteristic of the Samsung FER300 series. These models are designed to meet high energy-efficiency standards, helping users save on electricity bills while reducing their carbon footprint. Many of the refrigerators in this series also come with LED lighting, which not only illuminates the interior but also consumes less energy compared to traditional bulb lighting.

Furthermore, the stylish design of the FER300 models adds a modern touch to any kitchen. Available in various finishes, including stainless steel and sleek black, these refrigerators are built to blend seamlessly with a wide range of kitchen aesthetics.

In conclusion, the Samsung FER300 series represents a powerful combination of innovative features and technologies aimed at enhancing everyday living. With its focus on efficiency, functionality, and modern design, these refrigerators are an excellent choice for consumers seeking a reliable and stylish appliance.
Top Page Image Contents