Door Conversion
Fit new cap door closing to bottom hinge bracket. The new cap door closing is a mirror image of the existing part. Remove the hinge hole covers from the ends of the door using a narrow blade to prise them away from the door. The hinge hole covers are the components without holes. Keep them for
Move the hinge bearing on the door to the opposite side of Figure 3 the top of the door (refer Figure 3).
Fit the new hinge bearing closing hook to the opposite side of the bottom door. The new hinge bearing hook is a mirror image of the existing part.
Remove the old hinge bearing closing hook from the door (refer Figure 4).
Replace the door. Replace the top hinge bracket and secure with the top hinge bracket screws making sure that the door is square.
Figure 4
Hinge Cover | Top Hinge | Hinge Bearing | Hinge Hole |
Bracket | Cover |
Hinge Bearing | Bottom Hinge | Cap Door Closing | Bottom Hinge |
Closing Hook | Bolt |
| Bracket |
10