Maytag MBL2556KES Connect to Refrigerator, Style, Complete the Installation

Page 5

Connect to Refrigerator

Depending on your model, the water line may come down from the top or up from the bottom. Follow the connection instructions for your model.

Style 1

1.Remove plastic cap from water valve inlet port. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Confirm copper tubing is secure by pulling on copper tubing.

2.Create a service loop with the copper tubing. Avoid kinks when coiling the copper tubing. Secure copper tubing to refrigerator cabinet with a “P” clamp.

A

B

C

D

E

A. Copper tubing	D. Compression sleeve
B. “P” clamp	E. Water valve inlet port
C. Compression nut

3.Turn on water supply to refrigerator and check for leaks. Correct any leaks.

Style 2

1.Create a service loop (minimum diameter of 2 ft [61 cm]) with the copper tubing. Avoid kinks when coiling the copper tubing.

2.Remove the plastic cap from water valve inlet port. Place a compression nut and sleeve on the copper tubing.

3.Insert the end of the copper tubing into the water valve inlet port. Shape tubing slightly so that the tubing feeds straight into the port to avoid kinks.

4.Slide the compression nut over the sleeve and screw into the water valve inlet port.

A

B

C

D

A. Plastic water tubing	C. Compression nut
B. Sleeve	D. Copper tubing

5.Using an adjustable wrench, hold the nut on the plastic water line to keep it from moving. Then, with a second wrench turn the compression nut on the copper tubing counterclockwise to completely tighten. Do not overtighten.

	A
	B
	C
	D
	E
A. Plastic water line	D. Copper tubing
B. Water valve inlet port	E. “P” clamp
C. Compression nut

6.Check connection by pulling on copper tubing. Attach copper tubing to refrigerator cabinet with a “P” clamp. Turn on water supply to refrigerator and check for leaks. Correct any leaks.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill the ice container.

5

Image 5

Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerRecommended Grounding Method Location RequirementsElectrical Requirements Connect the Water Supply Water Supply RequirementsWater Pressure Reverse Osmosis Water SupplyStyle Complete the InstallationConnect to Refrigerator Remove Door and Hinges Style 1-Standard Door Refrigerator Doors and DrawerStyle 2-French Doors Replace Door and Hinges Style 1-Standard Door Reverse Door Standard Door optionalCabinet Refrigerator doorRemove and Replace Drawer Handle Remove and Replace Freezer DrawerRemove Drawer Front Replace Drawer FrontStyle 1-Standard Door Door Removal Replacement Door Swing Reversal optionalDrawer Front Removal Drawer Front Replacement Style 2-Four Adjustable Rollers Adjust the DoorStyle1-Two Adjustable Rollers Refrigerator USE Using the ControlsOpening and Closing Doors Electronic and Dial ControlsDigital Controls Crisper Humidity Control Water Filtration System Ice MakerWater Dispenser To Clean Your Refrigerator CleaningRefrigerator Care Changing the Light BulbRefrigerator Operation TroubleshootingIce and Water Temperature and MoistureWater dispenser will not operate properly Water Filter CertificationsWater is leaking from the dispenser system Water from the dispenser is warmApplication Guidelines/Water Supply Parameters Product Data SheetsLimited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverSécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Spécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Pression de leauRaccordement au réfrigérateur Raccordement de la canalisation deauRaccordement à une canalisation d’eau Style 2-Porte à deux battants Achever l’installationPortes et tiroir du réfrigérateur Poignées en plastique Dépose des portes et des charnières Style 1-Porte standardModèles avec tiroir de congélation Modèles de compartiments de congélation avec porteCaisse Réinstallation Porte et charnières Style 1-Porte standardPorte du compartiment de réfrigération Porte du compartiment de congélationDépose et réinstallation de la poignée du tiroir Retirer et réinstaller le tiroir du congélateurRéinstallation de la façade du tiroir Style 2-Portes à deux battantsStyle 1-Porte standard Inversion du sens douverture de la porte facultatifStyle 2-Portes à deux battants Charnières supérieuresStyle 2-Quatre roulettes ajustables Ajustement de la porteStyle 1-Deux roulettes ajustables Utilisation DU Réfrigérateur Utilisation des commandesOuverture et fermeture des portes Style 3-Vis de réglage de laplombCommandes numériques Door Alarm avertisseur de la porte Temp Alarm alarme de dépassement de températureReset Filter réinitialisation du filtre Fast Ice glaçons rapidesMachine à glaçons Distributeur d’eau Entretien DU RéfrigérateurSystème de filtration de leau NettoyageNettoyage de votre réfrigérateur Remplacement de l’ampoule d’éclairageFonctionnement du réfrigérateur DépannageGlaçons et eau Température et humiditéLeau du distributeur est tiède Le distributeur deau ne fonctionne pas correctementSystème de filtration d’eau intérieur Feuilles DE Données SUR LE ProduitLa présente garantie limitée ne couvre pas Garantie LimitéeArticles Exclus DE LA Garantie W10175446A SP PN W10175486A