Sirius Satellite Radio SRS-2VB Tools Required, Caution and Warnings, Splitter Port Identification

Tools Required

A phillips-type screwdriver and a 3/8 in. wrench is needed for installation. De- pending upon the type of installation, a power drill with a 3/32 in. drill bit may also be required.

Caution and Warnings

WARNING: Be sure not to cut, damage, or puncture the external jacket of the antenna cables during the installation procedure. Damage to the antenna cable can cause the SIRIUS signal to be degraded or unavailable, and can also cause water to intrude into the antenna cable causing the cable to fail.

Splitter Port Identification

For a successful installation, the various cables used in the installation process described later in this manual must be connected to the correct ports on the Split- ter. The following illustration identifies the 3 ports on the Splitter. This diagram should be used for reference during installation.

IN

	IN
	MODEL SRS-2VB
OUT1	2300-2400 MHz	OUT2

OUT1OUT2

Home Distribution Kit Installation Manual