Sirius Satellite Radio SRS-2VB installation manual Base

on the antenna base and align the screw holes in the mounting bracket with the screw hole in the antenna arm.

4. When the screw hole is aligned, re-insert screw B and snug it until it is tight.

1.2.

	BASE	ARM
			Incorrect
B	C
Remove Screw			Correct
	Verify the correct orientation
	of the antenna arm and
	antenna base

3.4.

Slide the antenna
arm over the
antenna base
mounting bracket	B
Align the	Re-insert screw
screw hole	and tighten

2. Determining a Location for the Antenna

For correct operation and best reception of the SIRIUS signal, it is important that the outdoor antenna is located in a place where it will have a clear view of the SIRIUS satellites in the sky. Obstructions such as bushes, trees, other homes or buildings, overhangs, soffits, chimneys, gables, dormers, etc., will impair or prevent the antenna from receiving a signal.

The best reception is obtained if the pod portion of the antenna (where the SIRIUS logo is printed) has a clear 360 degree view of the sky within the cone- shaped area shown in the following illustration.

 Home Distribution Kit Installation Manual