Installation instructions 15
Locating the area for gas and electrical connection
Fig. 12 Area for gas and electrical connections
Fitting the adjustable feet
Dotted line showing the position of the cooker when installed
Area for gas and electrical connections
max 290 mm
OR90 MODELS
Important!
Using the supplied adjustable feet is MANDATORY. For safety reasons and to ensure adequate ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
Fit the adjustable feet before using the cooker.
1Rest the rear of the cooker on a piece of the polystyrene packaging, exposing the base for fitting the feet.
2Fit the four feet by screwing them tight into the support base as shown.
Fig. 13 Location of feet | Fig. 14 Top of feet to be screwed in tightly |
Levelling the cooker
Level the cooker by screwing the feet in or out, as shown in Fig. 15.