Fisher & Paykel OR60, OR90 installation instructions Cooktop troubleshooting, Problem

Page 33

Cooktop troubleshooting

Problem

Possible solutions

31

A burner does not light.

Check the cooker is switched on at the wall. Check the gas supply valve is turned on and the supply to the house is working. You should hear the gas when you turn a burner on.

Check the gas bottle is not empty.

The ignitors may be dirty. Clean them with a toothbrush and methylated spirits.

The burner parts may not be located properly. Check the assembly and make sure the burner cap is sitting flat.

My burner flames are yellow or hard to start.

The burner parts may not be located properly. Check the assembly and make sure the burner cap is sitting flat.

If you use bottled gas, this may indicate you are getting near the end of the bottle.

Check the burner parts are clean and dry.

The gas pressure may not be at the correct level. Check with your service person or installer.

Your cooker may not be set up for the gas you are using. Check this with your service person or installer.

One of my burners has an uneven

Check the burner parts are clean and dry. Check the

flame.

assembly and make sure the burner cap is sitting flat.

 

 

The flame goes out at low

The gas supply pressure may be low. Check this with

settings.

your service person or installer.

 

The low setting may have been adjusted incorrectly.

 

Check this with your service person or installer.

 

If you use bottled gas, this may indicate you are

 

getting near the end of the bottle.

 

 

My burners do not turn down much (when running on bottled gas or LPG).

Your cooktop may not have been adjusted correctly. Check this with your service person or installer.

The flame tips are very yellow.

Call your service person to service the cooker.

 

 

There are objectionable odours.

Call your service person to service the cooker.

The flame appears to lift off the burner.

Call your service person to service the cooker.

There is an electricity failure.

If there is an electricity failure, you can still use your cooktop. Light the burners by holding a match close to the side of the burner and turning the control knob to the High position. Wait until the flame is burning evenly before adjusting.

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Installation instructions and User guide Page Contents Installation Safety and warningsPower supply Operation Important safety precautions Dimensions and clearances Installation instructionsLevelling the cooker Fitting the anti-tilt bracket Fitting the anti-tilt bracketInstallation with a flexible hose assembly Connecting the cooker to the gas supplyImportant! Do not use a naked flame to test for leaks Leak-testing and flame-testing the cookerReplacing the injectors Converting to a different gas typeTable for the choice of injectors Adjusting the minimum burner settingWiring diagram Product width Depth 600 Cavity width 900 Area for gas and electrical connections Fitting the adjustable feetFixing the backguard Moving the cookerPivoting Gas pressure CapCap Auxiliary, rapid and semi-rapid burners Adjusting the minimum burner setting Wiring diagram Page Control panel OR60 models Using your ovenFunction and temperature knobs Bake Cooking functionsGas burners Using your gas cooktopUsing the gas burners Before using your cooktopIf the flame is irregular If a burner does not lightDiameters of pans which may be used on the cooktop Matching cookware to burnerSmall pan support Wok standProblem Cooktop troubleshootingGeneral advice Care and cleaningCleaning the outside of the cooker Cleaning the gas cooktopReplacing the burners Burner parts and trivetsCorrect positioning of cap and ring triple-ring wok burner Replacing the triple-ring wok burnerRemoving the side racks Cleaning the inside of your ovenCleaning the grill tray and oven floor OR90 models Cleaning the oven door glassStorage compartment OR90 models Drawer OR60 modelsRemoving the oven door Removing the oven lamp OR60 models Replacing the oven lampWarranty and service Before you call for service or assistanceProduct details Page Part No a Italy Part No -ß1
Related manuals
Manual 44 pages 2.11 Kb Manual 84 pages 41.07 Kb Manual 32 pages 4.57 Kb

OR90, OR60 specifications

Fisher & Paykel has long been synonymous with innovation in the kitchen appliance sector, and the OR90 is a testament to this legacy. This multifunctional oven is designed not only to meet the diverse needs of modern cooking but also to elevate the culinary experience for home chefs.

One of the standout features of the Fisher & Paykel OR90 is its generous capacity. With a spacious interior, this oven allows users to cook larger portions or multiple dishes at once, making it ideal for family gatherings and entertaining. The design incorporates a sleek, modern aesthetic that seamlessly integrates with a variety of kitchen layouts, enhancing both functionality and visual appeal.

The OR90 is built with several advanced technologies that set it apart from traditional ovens. One of its key features is the self-cleaning function, which employs a pyrolytic cleaning system. This innovative method heats the oven to a high temperature, effectively incinerating any food residue, which allows for easy cleanup and maintenance.

The appliance also offers multiple cooking modes, providing versatility for different culinary techniques. Among these modes are bake, roast, grill, and fan bake, enabling users to achieve the perfect cooking results for any dish. The fan bake option circulates hot air evenly, ensuring consistent cooking temperatures, which is essential for achieving restaurant-quality results at home.

Additionally, the OR90 is equipped with advanced safety features. It includes a cool-to-touch door, which minimizes the risk of burns, making it a safe choice for families. Furthermore, the oven has a built-in temperature probe, allowing home chefs to monitor the internal temperature of meats and ensure they are cooked to perfection without constant checking.

Convenience is also at the forefront of the design, as the OR90 features intuitive controls and a user-friendly interface. The clear display offers easy navigation through the various settings, making it accessible for cooks of all skill levels.

In summary, the Fisher & Paykel OR90 is an excellent choice for those seeking a high-performance oven that combines innovative technology with user-friendly features. Its spacious capacity, self-cleaning capabilities, various cooking modes, and safety systems make it a valuable addition to any kitchen, empowering home chefs to explore their culinary creativity with confidence.
Top Page Image Contents