Levelling the cooker
Important!
Using the supplied adjustable feet is MANDATORY. For safety reasons and to ensure adequate ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
To fit the adjustable feet:
1Rest the rear of the cooker on a piece of packaging, exposing the base for fitting the feet.
2Screw the four feet to the cooker.
3 Stand the cooker and level it by screwing or unscrewing the feet with an adjustable spanner. Use the supplied nuts if necessary, see Figs. 2b and 2c.
Installation instructions | 7 |
|
OR60 MODELS
Fig. 2a Fitting the adjustable feet (supplied with the cooker in the feet kit)
0
+ 8 mm
Fig. 2b Do not use the supplied nuts for height adjustments between 0 and 8 mm.
+ 8 mm
+ 15 mm