Fisher & Paykel CG365DW manual Care and Cleaning, What?, How?

Page 12

CARE AND CLEANING

IMPORTANT!

Before any cleaning or maintenance, always: turn all burners off.

switch the power to the cooktop off at the wall.

make sure that the cooktop and its parts are a safe temperature to touch.

General advice

Clean the cooktop regularly—do not let stains become burnt on, as they may become very difficult to remove.

Do not use abrasive cleaners, cloths or pads to clean any part of your cooktop. Some nylon scourers may also scratch. Check the label.

Clean up spillages as soon as possible. If left to dry on, food residue may clog the flame ports, causing an uneven flame pattern.

Make sure that no cleaner residue is left on any cooktop part; when heated, these could stain the cooktop.

See the following pages for instructions on replacing the pan supports and reassembling the burners correctly after cleaning.

Do not clean cooktop parts in a self-cleaning oven. Do not use a steam cleaner.

WHAT?

HOW OFTEN?

Stainless steel base

After every use

Control dials

As needed

Brass flame spreader

As needed, but at least once a month

HOW?

1Soak any stubborn stains under a hot soapy cloth.

2Wipe the soiling off with a cloth using a mild household detergent or stainless steel

cleaner.

3Wipe with a clean damp cloth.

4Wipe the surface dry with a microfiber cloth.

5For extra shine, use a suitable stainless steel polish.

Hard water spots can be removed with household white vinegar.

1Wipe with a damp cloth and mild detergent. Stainless steel cleaner can be used on the top surface of the dials only.

2Dry thoroughly with a soft cloth.

Clean in hot soapy water. Dry thoroughly. Polish using a soft clean cloth and brass cleaner. Follow manfuacturers instructions.

IMPORTANT!

Do not use abrasive cleaners, steel soap pads or sharp objects on stainless steel.

Always read the label to make sure that your stainless steel cleaner does not contain chlorine compounds as these are corrosive and may damage the appearance of your cooktop.

Always rub the stainless steel in the direction of the grain.

The graphics are etched onto the steel by laser and will not rub off.

Do not use oven cleaner on the dials, as doing so may damage their coating.

Do not wash these parts in a dishwasher.

Brass naturally darkens on heating.

The wok burner parts may be polished back to their original color but this will be temporary.

10

Image 12
Contents User Guide What to do if YOU Smell GAS Contents Safety and Warnings Important Safety Instructions Important Safety Instructions Before using the cooktop for the first time IntroductionAbout your new cooktop Using Your Cooktop Adjusting the flame on the dual work burner Wok cooking Small pan supportCooking Guidelines and Cookware CookwareBurner Minimum Diameter Maximum Diameter Care and Cleaning WHAT?HOW? Ignitor Replacing the pan supports correctly Replacing the burner parts correctly Troubleshooting ProblemPossible Causes and Solutions Do not use the cooktop until it has been repairedTroubleshootingen Troubleshooting Warranty and Service Before you call for service or assistanceContact details Mise EN Garde Table DES Matières Consignes DE Sécurité ET Mises EN Garde Consignes DE Sécurité Importantes Consignes DE Sécurité Importantes Propos de votre nouvelle surface de cuisson Avant d’utiliser la surface de cuisson pour la première foisUtilisation DE Votre Surface DE Cuisson Réglage de la flamme du brûleur double pour wok Cuisson dans un wok Petite pièce d’appuiRecommandations Pour LA Cuisson ET Ustensiles DE Cuisson Ustensiles de cuissonBrûleur Minimum Diameter Maximum Diameter Entretien ET Nettoyage Conseils générauxQuelle PIÈCE? COMMENT?Avant de remettre en Place les pièces du brûleurBien sèches. Une pièce de Brûleur humide pourraitRéinstallation adéquate des pièces d’appui Réinstallation adéquate des pièces du brûleur Causes Possibles ET Solutions DépannageProblème Les orifices de brûleur Dépannage Garantie ET Réparation Pour nous contacterPage Page US CA