Fisher & Paykel CE302, CE604 installation instructions Safety and warnings, Installation

Page 4

2

Safety and warnings

Your safety is important to us. Please read this information before using your cooktop.

Installation

WARNING!

Electrical Shock Hazard

Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it.

Connection to a good earth wiring system is essential and mandatory. Alterations to the domestic wiring system must only be made by a qualified electrician.

Failure to follow this advice may result in electrical shock or death.

WARNING!

Cut Hazard

Take care – panel edges are sharp.

Failure to use caution could result in injury or cuts.

Image 4

Contents Installation instructions Page Contents Safety and warnings InstallationImportant safety instructions Operation and maintenance Electrical Shock HazardNever use your appliance as a work or storage surface Installation instructions Cooktop and cutout dimensionsClearances Clearances mmBefore you install the cooktop, make sure that When you have installed the cooktop, make sure thatThermal protection barrier must be Minimum clearance below cooktop base CE302 modelsFastening the cooktop to the bench CE302 models Turn the cooktop upside down and place it on a soft surfaceFastening the cooktop to the bench CE604 models Applying the adhesive seal aroound the edges of the cooktopConnecting the cooktop to the mains power supply Power supplyFinal checklist To be Completed by the InstallerIntroduction Before using your new cooktopAbout your new cooktop Using your cooktop Cooking zone controlsCooking guidelines CookwareGeneral cooking tips Care and cleaning What? How?They don’t, however, affect Troubleshooting Troubleshooting chartBefore you call for service or assistance Warranty and serviceProduct details Page Page Page Page NZ AU