Fisher & Paykel CE302, CE604 Operation and maintenance, Electrical Shock Hazard

Page 6

4

Safety and warnings

Operation and maintenance

WARNING!

Electrical Shock Hazard

Do not cook on a broken or cracked cooktop. If the cooktop surface should break or crack, switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician.

Switch the cooktop off at the wall before cleaning or maintenance.

Failure to follow this advice may result in electrical shock or death.

WARNING!

Fire Hazard

Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite.

Never use your appliance for warming or heating the room.

Failure to follow this advice may result in overheating, burning and injury.

WARNING!

Hot Surface Hazard

During use, accessible parts of this appliance will become hot enough to cause burns.

Do not let body, clothing or any item other than suitable cookware contact with the ceramic glass until the surface is cool.

Never leave metal objects on the cooktop as they can become hot very quickly.

Keep children away.

Handles of saucepans may be hot to touch. Check saucepan handles do not overhang other cooking zones that are on. Keep handles out of reach of children.

Failure to follow this advice could result in burns and scalds.

WARNING!

Cut Hazard

The razor-sharp blade of a cooktop scraper is exposed when the safety cover is retracted. Use with extreme care and always store safely and out of reach of children.

Failure to use caution could result in injury or cuts.

Image 6
Contents Installation instructions Page Contents Safety and warnings InstallationImportant safety instructions Operation and maintenance Electrical Shock HazardNever use your appliance as a work or storage surface Installation instructions Cooktop and cutout dimensionsClearances Clearances mmBefore you install the cooktop, make sure that When you have installed the cooktop, make sure thatThermal protection barrier must be Minimum clearance below cooktop base CE302 modelsFastening the cooktop to the bench CE302 models Turn the cooktop upside down and place it on a soft surfaceFastening the cooktop to the bench CE604 models Applying the adhesive seal aroound the edges of the cooktopConnecting the cooktop to the mains power supply Power supplyFinal checklist To be Completed by the InstallerBefore using your new cooktop IntroductionAbout your new cooktop Using your cooktop Cooking zone controlsCooking guidelines CookwareGeneral cooking tips Care and cleaning What? How?They don’t, however, affect Troubleshooting Troubleshooting chartWarranty and service Before you call for service or assistanceProduct details Page Page Page Page NZ AU