Fisher & Paykel DS602 manual To Activate Delay Start

Page 11

Delay Start

This feature allows you to delay the start of the wash program from one to twelve hours. It is useful if you want to take advantage of the off peak power rates. (Check with your local Electricity Utility if this is available), or if you wish to start the DishDrawer at a later time.

To Activate Delay Start

1.Ensure the DishDrawer is closed.

2.Press and hold the Start / Pause button. The light above the Start / Pause button will turn orange.

3.Hold or press the Start / Pause button and the time will increase in increments of one hour. The DishDrawer will emit a beep for each hour passed.

4.Release the button when the desired time has been reached.

The DishDrawer will automatically start when the time has elapsed.

To cancel the Delay Start, press the Power button or keep pressing until it passes 12 beeps / hour. The light above Start / Pause button will turn green when the Delay Start has been cancelled.

10

Image 11

Contents Page Contents Design Your Own Rack System Unique Features of Your DishDrawerTMIntroduction Clutter-Free Counter Top Becomes a RealityBig On the Inside AccessoriesGuilt-Free Small Load Gentler Introduction of DetergentPlease read all instructions before operating the DishDrawer Basic precautions, including the followingInstallation Operational MaintenanceImportant Safety Instructions Primary Control Buttons PowerControl Functions Start / Pause LockTo Activate Delay Start Delay StartProgram Secondary Control PanelOperating Instructions Purpose of Each Insert DishDrawerTM AccessoriesUsage Plate Insert Baskets Dishdrawertm LoadingSpray Arms Cup Rack PostsCutlery Baskets Detergent Quantities To Load the Detergent Dispenser Detergent and Rinse Agent DispenserDetergent Compartments How Much Rinse Agent to Use Rinse Agent Indicator LightRinse Agent Dispenser To Load the Rinse Agent DispenserTo Enter the Option Adjustment Mode Option Adjustment ModeRinse Agent Setting Water Pressure Auto PowerWash Phase Tsp Wash Program ChartReinstallation of the Upper Kickstrip Installation of Upper KickstripCare Guide Cleaning the DishDrawerTM User Maintenance InstructionVacation Time To Clean the Filter PlateProblem Possible Cause What to do Problem SolverRefer to Section on Foaming Incorrect amount Problem Possible Cause Fault Code U2 Fault Code DisplaysIndicative Lights Faultwhat to do Fault Code F1 Indicative Lights Fault What to do DishDrawer Warranty Proof of Purchase Service