Fisher & Paykel DS602 manual Indicative Lights Faultwhat to do

Page 33

FAULT CODE DISPLAYS

INDICATIVE LIGHTS

FAULTWHAT TO DO

Rinse Heavy Normal Fast Delicate

FAULT CODE U1

Fill Fault

Incorrect Installation

Blocked inlet hose

Filter plate and spray arm incorrectly installed

Very low water pressure (<4 psi)

λ

λ

Excessive foam. Refer to Section on Problem Solver.

Check the inlet hose is connected and the water faucet is turned on.

Check the spray arm is correctly placed on the impeller. Refer to the

Section on User

Maintenance

Instruction.

Check the installation of the drain hose(s) and ensure it is supported to the recommended height above the base of the DishDrawer.

Check inlet hose filter is not blocked.

Check the filter plate is properly locked securely in place and the spray arm is correctly on the impeller. Refer to

Section on User

Maintenance

Instruction.

Change the water pressure setting to "LP".

Refer to Section on Option Adjustment Mode.

32

Image 33

Contents Page Contents Introduction Unique Features of Your DishDrawerTMClutter-Free Counter Top Becomes a Reality Design Your Own Rack SystemGuilt-Free Small Load AccessoriesGentler Introduction of Detergent Big On the InsidePlease read all instructions before operating the DishDrawer Basic precautions, including the followingInstallation Operational MaintenanceImportant Safety Instructions Power Control FunctionsPrimary Control Buttons Start / Pause LockTo Activate Delay Start Delay StartProgram Secondary Control PanelOperating Instructions DishDrawerTM Accessories UsagePurpose of Each Insert Plate Insert Baskets Dishdrawertm LoadingCup Rack Posts Cutlery BasketsSpray Arms Detergent Quantities Detergent and Rinse Agent Dispenser Detergent CompartmentsTo Load the Detergent Dispenser Rinse Agent Dispenser Rinse Agent Indicator LightTo Load the Rinse Agent Dispenser How Much Rinse Agent to UseOption Adjustment Mode Rinse Agent SettingTo Enter the Option Adjustment Mode Water Pressure Auto PowerWash Phase Tsp Wash Program ChartReinstallation of the Upper Kickstrip Installation of Upper KickstripCare Guide Cleaning the DishDrawerTM User Maintenance InstructionVacation Time To Clean the Filter PlateProblem Possible Cause What to do Problem SolverRefer to Section on Foaming Incorrect amount Problem Possible Cause Fault Code U2 Fault Code DisplaysIndicative Lights Faultwhat to do Fault Code F1 Indicative Lights Fault What to do DishDrawer Warranty Proof of Purchase Service