Fisher & Paykel DS602 manual Option Adjustment Mode, Rinse Agent Setting

Page 21

OPTION ADJUSTMENT MODE

After using the DishDrawer, you may want to change some of the preset options to suit your needs. You can change the following settings:

•Rinse Agent

•Auto Power

•Water Pressure

To make these changes it is necessary to enter into the Option Adjustment Mode

To Enter the Option Adjustment Mode

•Press the Power button to turn the DishDrawer on.

•Press and hold the Program and Eco Save button simultaneously for five seconds.

•When the buttons have been pressed correctly the DishDrawer will give one long beep.

•Release the two buttons. Use the buttons on the primary and secondary control panel to make your changes to the pre set options. These are explained below.

•Press Power to return to the Normal mode. Your DishDrawer will save these changes automatically.

•To make further changes repeat the above steps.

Rinse Agent Setting

•Enter the Option Adjustment Mode as explained above.

•The current rinse agent setting is shown on the secondary control panel in orange lights.

•Press the Program button to advance the setting. The options are from one to five. For example two orange lights indicate the rinse agent setting is set at two. Select the setting you require.

•Press Power button to return to the Normal mode.

20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Page Contents Introduction Unique Features of Your DishDrawerTMClutter-Free Counter Top Becomes a Reality Design Your Own Rack SystemGuilt-Free Small Load AccessoriesGentler Introduction of Detergent Big On the InsidePlease read all instructions before operating the DishDrawer Basic precautions, including the followingInstallation Operational MaintenanceImportant Safety Instructions Power Control FunctionsPrimary Control Buttons Start / Pause LockTo Activate Delay Start Delay StartProgram Secondary Control PanelOperating Instructions DishDrawerTM Accessories UsagePurpose of Each Insert Plate Insert Baskets Dishdrawertm LoadingCup Rack Posts Cutlery BasketsSpray Arms Detergent Quantities Detergent and Rinse Agent Dispenser Detergent CompartmentsTo Load the Detergent Dispenser Rinse Agent Dispenser Rinse Agent Indicator LightTo Load the Rinse Agent Dispenser How Much Rinse Agent to UseOption Adjustment Mode Rinse Agent SettingTo Enter the Option Adjustment Mode Water Pressure Auto PowerWash Phase Tsp Wash Program ChartReinstallation of the Upper Kickstrip Installation of Upper KickstripCare Guide Cleaning the DishDrawerTM User Maintenance InstructionVacation Time To Clean the Filter PlateProblem Possible Cause What to do Problem SolverRefer to Section on Foaming Incorrect amount Problem Possible Cause Fault Code U2 Fault Code DisplaysIndicative Lights Faultwhat to do Fault Code F1 Indicative Lights Fault What to do DishDrawer Warranty Proof of Purchase Service
Top Page Image Contents