Fisher & Paykel DS602 manual Fault Code F1

Page 34

FAULT CODE DISPLAYS

			INDICATIVE LIGHTS
	FAULT						WHAT TO DO
	FAULT	Rinse	Heavy	Normal	Fast	Delicate	WHAT TO DO
		Rinse	Heavy	Normal	Fast	Delicate

	FAULT CODE F1

	Flood Switch				λ		Turn the water faucet
	has been						and mains power off to
	activated						the DishDrawer and
							call your Fisher &
							Paykel Authorized
							Service Agent.

	FAULT CODE F2

	Motor				λ		Ensure the motor
	Problem						assembly area is free of
							foreign matter. Refer to
							Section on User
							Maintenance
							Instruction.
	Motor						Correctly install the
	Assembly						motor assembly. Care
	incorrectly						should also be taken to
	installed						ensure the filter plate
							and spray arm are
							correctly placed. Refer
							to Section on User
							Maintenance
							Instruction.

	FAULT CODE F3

	Water				λ	λ	Ensure the inlet water
	temperature						supply is no greater
	greater than						than 150°F.
	175°F
	Temperature						Call your Fisher &
	Sensor has						Paykel Dealer or
	failed						Authorized Service
							Agent.

33

Image 34

Contents Page Contents Clutter-Free Counter Top Becomes a Reality Unique Features of Your DishDrawerTMIntroduction Design Your Own Rack SystemGentler Introduction of Detergent AccessoriesGuilt-Free Small Load Big On the InsideBasic precautions, including the following Please read all instructions before operating the DishDrawerInstallation Maintenance OperationalImportant Safety Instructions Control Functions PowerPrimary Control Buttons Lock Start / PauseDelay Start To Activate Delay StartSecondary Control Panel ProgramOperating Instructions Usage DishDrawerTM AccessoriesPurpose of Each Insert Plate Insert Dishdrawertm Loading BasketsCutlery Baskets Cup Rack PostsSpray Arms Detergent Quantities Detergent Compartments Detergent and Rinse Agent DispenserTo Load the Detergent Dispenser To Load the Rinse Agent Dispenser Rinse Agent Indicator LightRinse Agent Dispenser How Much Rinse Agent to UseRinse Agent Setting Option Adjustment ModeTo Enter the Option Adjustment Mode Auto Power Water PressureWash Program Chart Wash Phase TspInstallation of Upper Kickstrip Reinstallation of the Upper KickstripCare Guide User Maintenance Instruction Cleaning the DishDrawerTMTo Clean the Filter Plate Vacation TimeProblem Solver Problem Possible Cause What to doRefer to Section on Foaming Incorrect amount Problem Possible Cause Fault Code Displays Fault Code U2Indicative Lights Faultwhat to do Fault Code F1 Indicative Lights Fault What to do DishDrawer Warranty Service Proof of Purchase