o p t i o n a d j u s t m e n t m o d e
HOW TO ENTER OPTION ADJUSTMENT MODE
After using the 
you may want to change some of the preset options to suit your needs. The settings for Rinse Agent, Water Softener, Auto Power, End of Wash Program Beeps, Closed Drawer and Clean Dish Indicator options can be changed.
Prefinished and Integrated Models
1.Press the POWER button to turn the 
to the Normal Operating Mode.
2.Press and hold the ECO and LOCK buttons for 5 seconds. When the buttons have been correctly pressed, one long beep is emitted.
3.Release the LOCK and ECO buttons.
4.Use the appropriate buttons on the control panel to make the necessary adjustments. These are explained below.
5.Once the changes have been made, press the POWER button to return to the Normal Operating Mode.
The 
will save these changes automatically.
How to Adjust the Rinse Agent Setting
Prefinished Models
1.Enter the Option Adjustment Mode as explained previously. The letters "rA" will be shown on the Electronic Display.
2.The current rinse aid setting is shown on the wash program indicator in red lights. If four red lights are lit on the wash program indicator then the rinse agent setting is at four.
3.Press the LOCK button to increase or decrease the rinse agent
setting, the red lights will scroll up to 5 and then start from 1 again.
4.Once you have selected the desired rinse agent setting, press the POWER button to return to the Normal Operating Mode.
Electronic display
Example of Rinse Agent set to 4.
Integrated Models
1.Enter the Option Adjustment Mode as explained previously. The light above the START/PAUSE button is red to indicate this setting has been chosen.
2.The current rinse agent setting is shown on the wash program indicator in red lights. If four red lights are lit on the wash program indicator then the rinse agent setting is at four.
3.Press the LOCK button to increase or decrease the rinse agent
setting, the red lights will scroll up to 5 and then start from 1 again.
4.Once you have selected the desired rinse agent setting, press the POWER button to return to the Normal Operating Mode.
Example of Rinse Agent set to 4.
How to Adjust the Water Softener Setting
(for models DD603H and DS603H only)
Prefinished Models
1.Enter the Option Adjustment Mode as explained previously.
2.Press the START/PAUSE button until the letters ’hd’ appear on the electronic display. The current water softener setting is shown on the wash program indicator in red lights. If four red lights are lit then the water softener setting is at four.
3.Press the LOCK button to increase or decrease the water softener setting. For example, if the water hardness is 500ppm, the number of lights that are lit should be four.
4.Once you have selected the desired water softener setting, press the POWER button to return to the Normal Operating Mode.
Electronic display
Example of the Water Softener set to 4.
Integrated Models
1.Enter the Option Adjustment Mode as explained previously.
2.Press the START/PAUSE button until the light above the START/PAUSE button is green, if it is not, press the POWER button and start again. The current water softener setting is shown on the wash program indicator in red lights. If four red lights are lit, then the water softener is set to four.
3.Press the LOCK button to increase or decrease the water softener setting. For example, if the water hardness is 500ppm, there should be four red lights lit.
4.Once you have selected the desired water softener setting, press the POWER button to return to the Normal Operating Mode.
Example of the Water Softener set to 4.
17