Fisher & Paykel DishDrawer manual Cleaning the Drain Filter, Spray Arm and Filter Plate

Page 23

If a dishwasher cleaner/descaler is used, you must run a wash program with detergent immediately afterward to prevent any damage

to the .

Spray Arm

Filter Plate

Drain Filter

Internal Parts of the

Cleaning the Drain Filter, Spray Arm and Filter Plate

We recommend the drain filter to be cleaned whenever there is evidence of food particles. The filter plate is designed to be self cleaning, but food scraps may accumulate. The spray arm and filter plate may need cleaning about once a month in normal use or more often, should the need arise.

Cleaning the Filter Plate

1.Ensure the is cool before you start cleaning and follow the instructions for removing the drain filter and spray arm.

2.In the center of the filter plate, there are two rings. Hold the center ring still and turn the outer ring counter-clockwise, about a 1/8 turn. This will release the filter plate.

3.When cleaning the underside of the filter plate, care must be taken on the sharp outer edge to avoid the risk of cut type injuries.

4.Remove any soil, wash in hot soapy water and rinse thoroughly in clean water. The heater plate can be wiped with a damp cloth.

5.Replace the filter plate so it lies flat in the base of the

ensuring the filter plate is fully locked into position with the center ring.

6.To lock the filter plate into position, ensure the lines align with each other (refer to the diagram for the correct position). The filter plate must not be able to move about freely.

Cleaning the Drain Filter

1.Lift up the drain filter access panel, if fitted on the basket.

2.Lift and remove the drain filter

out of the .

3.Empty, rinse under clean running water and replace back into the allocated space.

4.Ensure the drain filter is flush with the filter plate.

Cleaning the Spray Arm

1.Remove the basket carefully. Lift from the back end first so that you do not knock the detergent and rinse agent dispenser.

2.Lift the spray arm and shake any foreign material out.

3.Rinse the spray arm under water and wipe the spray arm with a damp cloth.

4.Replace the spray arm back onto the impeller.

Correct Locking Position of

Filter Plate with Motor

Assembly

Impeller

Center Ring

Outer Ring

WARNING

The

must be used with the filter plate, drain

filter and spray arm correctly in place.

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents E R G U I D E N t e n t s E r g u i d e PrefinishedT r o d u c t i o n E c i a l t a l e n t s E r a t i n g i n s t r u c t i o n s prefinished model Finish CheckStart PauseLast program used E r a t i n g i n s t r u c t i o n s integrated modelTo select Desired wash.Delay Start Mode optional Cutlery Basket C e s s o r i e sBasket Plate InsertA d i n g HOW to Load YourPersons away from When T e r g e n t d i s p e n s e rFilling the Detergent Dispenser Detergent QuantitiesSoft Water Situations Rinse Agent Indicator Light Hard Water SituationsN s e a g e n t d i s p e n s e r Above 625ppm, the performance of your will decline Setting Grains per Gallon gpg Parts per Million ppmTo Ensure Optimum Performance of the Water Softener 100 250 350 450 550Open How to Fill the Salt ReservoirSalt Indicator Light Salt ReservoirR i n g f o r y o u r d i n n e r w a r e Heavy Normal Fast Delicate S h p r o g r a m sHeavy Normal Fast Delicate Rinse S h w a s h e r s t a n d a r d s t e s t Release the Lock and ECO buttons Enter the Option Adjustment Mode as explained previouslyT i o n a d j u s t m e n t m o d e Prefinished and Integrated ModelsHow to Remove the Auto Power Option How to Install the Closed Drawer Option White or Black Finish CleaningE r m a i n t e n a n c e i n s t r u c t i o n s Iridium Finish Matt Stainless SteelReplace the spray arm back onto the impeller Cleaning the Drain Filter, Spray Arm and Filter PlateLift and remove the drain filter Out Ensure the drain filter is flush with the filter plateTroubleshooting Run Through a wash program Incorrectly placed Correct placementService Agent Will not open May stain the insideHow to Attend to a Fault Code Fault codesHow to Recognize a Fault Code Enclosure panels are properly in place Operating InstallationDo not install or store the where it will be To the power supplySupply to the off MaintenanceOperational Damage toCorrecting faults caused by the user This warranty does not coverUSA if you need assistance Before you call for service or assistanceS t o m e r c a r e Is square and level Is fastened securely to the cabinetry E c k l i s tUSA Customer Care 1 888 9 FNP USA 1 888 9 367
Top Page Image Contents