Thermador PH42, PH54, PH48, PH36, PH30 installation instructions Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

APPROVED FOR ALL RESIDENTIAL APPLIANCES

FOR RESIDENTIAL USE ONLY

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

IMPORTANT: Save these Instructions for the Local Electrical Inspector’s use.

INSTALLER: Please leave these Instructions with this unit for the owner.

OWNER: Please retain these instructions for future reference.

WARNING

If the information in this manual is not followed exactly, fire or shock may result causing property damage or personal injury.

Do not repair or replace any part of the appliance unless specifically recommended in the manuals. Improper installation, service or maintenance can cause injury or property damage. Refer to this manual for guidance. All other servicing should be done by a qualified technician.

Unit is heavy and requires at least two people or proper equipment to move.

Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance.

This appliance complies with one or more of the following Standards:

UL 858, Standard for the Safety of Household Electric Ranges

UL 923, Standard for the Safety of Microwave Cooking Appliances

UL 507, Standard for the Safety of Electrical Fans

ANSI Z21.1- American National Standard for Household Cooking Gas Appliances

CAN/CSA-C22.2 No. 113-M1984 Fans and Ventilators

CAN/CSA-C22.2 No. 61-M89 Household Cooking Ranges

It is the responsibility of the owner and installer to determine if additional requirements and/ or standards apply to specific installations.

SAFETY WARNING

Turn off power circuit at service panel and lock out panel, before wiring this appliance.

REQUIREMENT: 120 VAC, 60 Hz 20 A

WARNING

To reduce the risk of fire, use only metal duct work.

If required by the National Electrical Code (or Canadian Electrical Code), this appliance must be installed on a separate branch circuit.

Installer - show the owner the location of the circuit breaker or fuse. Mark it for easy reference.

Remove all tape and packaging before using the appliance. Destroy the packaging after unpacking the appliance. Never allow children to play with packaging material.

Never modify or alter the construction of the appliance. For example, do not remove leveling legs, panels, wire covers or anti-tip brackets/screws.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current.

This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

1

Image 2
Contents Instrucciones DE Instalación Models PH30 PH36 PH42 PH48 PH54Important Safety Instructions Important Safety Instructions Parts Included with your Hood Parts Not Included with your HoodAppliance Installation Vent unit to outside of building, onlyWall Mount Installation Wooden BracketHood Size Assembly and Installation of the Duct Covers Cabinet Installation Centerline Hole Dimensions for Figures 10Hood can be installed with a VTN1030C blower Installing an Integral Blower VTN1030CInstall blower in hood Blower preparationRoute wires here Wire cover Remote Blower Installation Wiring the Hood with an Integral MotorWiring the Hood with a Remote Blower Instructions DE Sécurité Importantes Instructions DE Sécurité Importantes Pièces comprises avec la hotte Pièces non comprisesInstallation de lappareil Ventiler lappareil vers lextérieur de lédifice seulementInstallation murale Fixation à bois30 po 13 1/16 po 36 po Assemblage et installation des couvercles de conduit Installation de larmoire Dimensions du trou de la ligne centrale pour lesLa hotte peut être installée avec la Soufflerie VTN1030C Installation de la soufflerie intégrée VTN1030CInstaller la soufflerie dans la Hotte Préparation de la soufflerieAcheminer fil ici Couvercle de fil De fil Installation de la soufflerie à distance Câblage de la hotte avec Moteur intégréInstrucciones Importantes DE Seguridad Cuidado Ventile la unidad hacia afuera del edificioPartes Incluidas con su Campana Partes No Incluidas con su CampanaInstalación del Aparato Figura 1a Dirección de descarga 30, 36, 42, 48Instalación con Montaje en Pared Soporte de MaderaTamaño DE Montaje e Instalación de las Cubiertas de Conducto Instalación con Gabinete 29 -1 13 -7 35 -1 16- 7 41- 1 19 -7 47 -1 22 -7 53 -1 25 -7Instalar el soplador en la Campana Instalar un Soplador Integral VTN1030CPreparación del soplador Se puede instalar la campana con un Soplador VTN1030CFigura 12e Cubierta de cable Instalación del Soplador Remoto Conectar la campana con un Motor integralConectar la campana con un Soplador Remoto Page Page
Related manuals
Manual 36 pages 33.73 Kb

PH30, PH36, PH42, PH48, PH54 specifications

The Thermador PH series, consisting of the PH54, PH48, PH42, PH36, and PH30 models, represents a pinnacle of culinary design and technology in the world of high-end kitchen appliances. These professional-grade refrigerators are crafted to meet the needs of aspiring chefs and home cooks alike, offering unparalleled performance, spaciousness, and advanced features.

One of the standout characteristics of the PH series is its sleek, integrated design. These refrigerators blend seamlessly with kitchen cabinetry, providing a sophisticated aesthetic that enhances any modern kitchen. With a robust construction, Thermador ensures durability and longevity, making these appliances a smart investment for any kitchen space.

Among the innovative technologies featured in the PH series is the Fresh Food Preservation system. This cutting-edge technology utilizes a precise temperature management system, ensuring that food stays fresher for longer. The models also come equipped with a MultiAirFlow system which optimizes air circulation within the refrigerator, maintaining consistent temperatures throughout and preventing hot spots that can spoil food.

The PH54, PH48, PH42, and PH36 models boast expansive storage options, with adjustable shelves and spacious drawers designed for maximum flexibility. The titling glass shelves allow for easy organization and retrieval, while soft-close mechanisms provide an added touch of luxury and convenience. Each unit also includes a dedicated crisper drawer to keep fruits and vegetables fresh and crisp.

Energy efficiency is a key feature in the PH series, with models designed to consume less energy while delivering high performance. This not only helps the environment but also reduces utility bills, making these refrigerators a practical choice for eco-conscious consumers.

Additionally, the intuitive control panel and Smart Home connectivity allow users to monitor and adjust settings remotely. Thermador’s Home Connect technology enables users to access appliance information via a smartphone app, allowing for greater convenience and customization of settings.

In summary, the Thermador PH series — encompassing the PH54, PH48, PH42, PH36, and PH30 models — combines elegant design, innovative technology, and efficient features to create some of the most sought-after refrigeration solutions on the market. With their focus on quality, performance, and usability, these refrigerators are perfect for anyone looking to elevate their culinary experience.