Thermador Range, PRO-HARMONY, 336, DP30, DP36 Gas Requirements and Hookup, Hook UP, Photo a

Page 15

Step 5: Gas Requirements and Hookup

Verify the type of gas being used at the installation site.

The appliance is shipped from the factory for use with natural gas. It must be converted for use with propane. A qualified technician or installer must do the conversion. Make certain the range matches the type of gas available at this location.

For installation of the appliance at high altitude, please consult your local gas company for their recommen- dation of the correct orifice sizes and any other necessary adjustments that will provide proper gas combustion at specified altitudes.

The field conversion kit for this series of Dual Fuel Ranges is Thermador Model PLPKIT. Obey all in- structions in PLPKIT for correct conversion of the gas regulator and settings for the gas valves.

This appliance has been CSA certified for safe opera- tion up to an elevation of 10,200 ft. without any modi- fications. Exception: For use with propane, the appli- ance must be converted per the LP conversion in- structions.

CAUTION

When connecting unit to propane gas, make certain the propane gas tank is equipped with its own high pressure regulator in addition to the pressure regulator supplied with the appliance. The pressure of the gas supplied to the appli- ance regulator must not exceed 14" (34.9 mb) water column.

Natural Gas Requirements:

Inlet Connection: 1/2" NPT internal (Minimum 3/4" dia. flex line.)

Supply Pressure: 6" min. to 14" max. water column. (14.9 to 34.9 mb)

Manifold Pressure: 5" water column (12.5 mb)

Propane Gas Requirements:

Inlet Connection: 1/2" NPT internal (Minimum 3/4" dia. flex line.)

Supply Pressure: 11"min.to14"max.watercolumn. (27.4 mb to 34.9 mb)

Manifold Pressure: 10" water column (24.9 mb)

WARNING

Gas line must not come in contact with any components inside back cover of range. Run gas line in channel in back of range.

HOOK UP

A manual gas shut-off valve must be installed external to the appliance, in a location accessible from the front, for the purpose of shutting off the gas supply. The supply line must not interfere with the back of the unit. Make sure the gas supply is turned off at the manual shut-off valve before connecting the appliance.

The range is supplied with its own pressure regu- lator that has been permanently mounted within the range body.

Use 3/4" flex line to connect between the gas supply and the appliance manifold pipe, which exits the upper rear of the appliance. The appli- ance manifold pipe connection is 1/2" NPT. (See Photo A.) Use caution to avoid crimping the 3/4" flex line when making bends. Suggested length of flex line is 48", however, please check local codes for your area's requirements before installation.

The gas supply connections shall be made by a competent technician and in accordance with local codes or ordinances. In the absence of local codes, the installation must conform to the National Fuel Gas Code ANSI Z223.1/NFPA54- current issue.

Always use pipe sealing compound or Teflon® tape on the pipe threads, and be careful not to apply excessive pressure when tightening the fittings.

Leak testing of the appliance shall be in accor- dance with the following instructions.

Turn on gas and check supply line connections for leaks using a soap and water solution.

Bubbles forming indicate a gas leak. Repair all leaks immediately after finding them.

Do not use a flame of any kind to check for gas leaks.

Photo A

Channel for gas line

Use 3/4" flex line to connect between the gas supply and the appliance manifold pipe.

12

Image 15
Contents Installation Instructions What to do if YOU Smell GAS For Massachusetts InstallationsDo Not install this range outdoors Please Read Entire Instructions Before ProceedingContents Gas Supply Important Installation InformationElectric Power Supply GAS type verificationConsider Make-Up Air Hood PlacementVentilation Requirements Select Hood and Blower ModelsCabinet Preparation Cabinet Clearances Side View Gas & Electrical Supply Locations for All Dual Fuel Ranges GAS and Electric SupplyWall Connection Electrical SUPPLY, Dual Fuel RangesDo not remove the grill or griddle assemblies Unpacking, Moving and Placing the RangeGrill/Griddle Tilt Adjustment Not All Models Property Damage Installing Anti-Tip DeviceTools Needed for Installation of Anti-Tip Device Range Tipping HazardImportant Installation Information 36 Dual Fuel Ranges Figures 6Mounting ANTI-TIP Bracket Gas Requirements and Hookup Hook UPPhoto a Electrical Requirements, Connection & Grounding Chart B Electrical Supply Circuit RequirementsRated 125/250 Volts Hard Wiring Units mayWire Connection Wire Lead ConnectionBackguard Installation Front of RangeGuard Strip Door Removal and Reinstallation To Reinstall the Oven DoorTo Remove the Oven Door Yellow Tips on Outer Cones Burner Test and AdjustmentTest Rangetop Burners Yellow FlamesAir Shutter Adjustment if necessary Flame Adjustment if necessaryOperation Final Check ListGAS Supply ElectricalPage Avertissement Pour les installations au MassachusettsNE PAS installer cette gamme dehors Veuillez lire toutes les instructions Avant de poursuivreLe branchement et la mise à la terre Table des matièresMise EN Garde Informations importantes à propos de linstallationEmplacement de la hotte Choix du modèle de hotte et de ventilateurApport d’air Chapitre 2 Préparation de l’emplacement Dégagement des armoires Vue latérale Remarque Alimentation DE GAZ ET ÉlectriqueCordon d’alimentation et prise RemarquePallette Réglage de langle du gril/grille certains modèles Chapitre 4 Installation du dispositif antibascule Avertissement Danger DE BasculementAvertissement Risque D’ÉLECTROCUTION Informations Importantes À Propos DE L’INSTALLATION Cuisinières à combustion jumelée 30 et 36 Figures 6 etMontage DE LA Patte Antibascule Photo a RaccordementExigences pour le gaz naturel Exigences pour le gaz propaneTableau B exigences du circuit dalimentation électrique Étape 6 exigences électriques, connexions et mise à la terreJonction de la cuisinière avec un N D U C T E U R SCUISINIÈRE. Le nécessaire de Cordon doit être fixé à la boîte deConnexion À 4 Fils Connexon À 3 FilsChapitre 7 Installation du dosseret La bandeDevant de la cuisinière Retrait de la porte Chapitre 8 Retrait et installation de la porteInstallation de la porte Faire Attention Pour Retirer LA PORTE, Elle EST LourdeVérifier la flamme. Réglage bas. Tourner le bouton Vérifier les brûleurs de surfaceAu besoin Réglage de flamme au besoinFonctionnement Liste Finale DE VérificationAlimentation EN GAZ ÉlectricitéRemarques
Related manuals
Manual 84 pages 36.07 Kb

DP36, DP30, 336, PRO-HARMONY, Range specifications

The Thermador DP30 is a standout in the world of luxury built-in refrigerators, designed for those who appreciate both aesthetics and functionality in their kitchen appliances. This model combines sleek design with cutting-edge technology, making it a perfect choice for high-end culinary spaces.

One of the standout features of the DP30 is its remarkable storage capacity. With a spacious interior layout, it allows users to organize items efficiently, thanks to adjustable shelves and door bins. The adjustable glass shelves can easily accommodate tall items, ensuring that everything from large bottles to delicate produce has a secure spot. The dual refrigeration system in the DP30 maintains consistent temperatures in both the refrigerator and freezer compartments, ensuring optimal food preservation.

Thermador’s innovative Fresh Food Preservation technology plays a crucial role in extending the life of your ingredients. This feature utilizes dynamic cooling to minimize temperature fluctuations, while the air filtration system helps control odors, keeping your food fresher for longer. Additionally, the DP30 includes a humidity-controlled crisper drawer, perfect for maintaining the freshness of fruits and vegetables.

Another noteworthy aspect of the DP30 is its user-friendly interface. The intuitive control panel allows users to adjust temperatures and settings with ease. Furthermore, the refrigerator is equipped with advanced LED lighting, which illuminates the interior beautifully, making it easy to find what you need at a glance.

The Thermador DP30 also emphasizes energy efficiency. With an Energy Star rating, homeowners can enjoy the benefits of a powerful refrigerator without significantly increasing their energy bills. This model is designed not only to perform but also to reduce its environmental footprint, making it a practical choice for eco-conscious consumers.

Aesthetically, the DP30 offers a customizable panel-ready option, allowing homeowners to match the refrigerator’s exterior with their kitchen cabinetry for a seamless look. The elegant stainless steel finish is also a popular choice, complementing modern kitchen designs.

In conclusion, the Thermador DP30 refrigerator stands out for its blend of innovation, luxury, and practicality. With features aimed at enhancing food preservation, user convenience, and aesthetic integration, it is an appliance designed for the modern, discerning homeowner who values quality in their kitchen. Whether hosting lavish dinner parties or preparing everyday meals, the DP30 is a reliable partner in culinary excellence.