GE ZIRS36N RH, ZIFS36N RH, ZIFS36N LH, ZIRS36N LH Step Secure Products To Sides, Grille Base Cover

Page 16

ZUGSS Trim Kit

Unified Stainless Steel Grille Panel

Step 4

Secure

Products

To Sides

NOTE: This step can be used as an alternative to Step 2, Anti-Tip bracket installation, whenever brackets cannot be used. Whenever possible, perform this step for additional anti-tip security.

When using 1/2" to 3/4" thick side panels, the front flange of the case trim is attached to the side panel.

•Open door to access case trim.

•Drill hole in trim slightly below the interior opening.

•Drive screw through the trim and into the side panel.

•Follow the same procedure on the opposite outside product trim.

 

Refrigerator

Stud

Cabinet

 

Door

 

Spacer

 

Block

OR

 

If the product is installed between cabinets with no side panels or into a custom enclosure, install a spacer block as shown.

Step 5

Install Center

Trim Strip

Step 6

Remove

Wire Fence and

Switch Cover

•Open doors fully.

•Starting at the top, press trim strip over inside case trims of both products.

•Continue pressing trim until you reach the bottom of the case trims. The trim will align with the top and bottom of the case trim.

Case Trim

U-Shape

Trim

Remove

Grille Base Cover

3 Screws

 

• Remove 3 screws holding the wire fence on both

• Lift off grille base covers. Discard covers.

products. Retain fences and all screws.

 

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page Contents Flush or Semi-Flush Enclosure Installations DimensionsCutout ProductSide By Side Installation Freezer Refrigerator Accessory Grille Panel KitsInstallation Between Base Wall Cabinets ExamplesInstallation At End-of-Run Product DimensionsFrameless Cabinets ZIRS36N RH, Refrigerator ZIFS36N RH, FreezerClearances ElectricalWater ConnectionGrounding Important Please read carefullyUse of Adapter plug Use of Extension CordsTools RequiredMaterials HardwareInstall StepWater Line Shut off the main water supplyStep Install Side Panels Anti-Tip BracketsLevel Secure Product to SidesCheck Power ConnectOn the unit and tighten nut to union Turn on the water to check for leaksAdjust Door Step Set temperature control at TemperatureBefore making adjustments ProblemStep Install Spacer Pads Replace Side Case Trims Parts ListTools and Materials Required Roll Both Products into Opening Step Install Anti-Tip BracketsStep Level Both Products Remove 3 screws holding the wire fence on both Step Secure Products To SidesGrille Base Cover Products. Retain fences and all screwsStep Install Grille Base Cover Remove Grille Frame Reinstall Screws Step Install Soffit Vent TopMount Outside case trim Unified Grille Panel Step Adjust Door Alignment Pub. No Part No D3003P001

ZIRS36N LH, ZIFS36N LH, ZIFS36N RH, ZIRS36N RH specifications

The GE ZIRS36N RH, ZIFS36N RH, ZIFS36N LH, and ZIRS36N LH are part of General Electric's innovative line of side-by-side refrigerators, designed to meet the needs of modern households while providing exceptional performance and convenience. These models are characterized by a sleek and stylish exterior, making them an attractive addition to any kitchen.

One of the standout features of these refrigerators is their advanced cooling technology. They incorporate a multi-air flow system that ensures even distribution of cold air throughout the refrigerator and freezer compartments. This technology helps maintain optimal temperature levels, keeping food fresher for longer, while also minimizing temperature fluctuations that can lead to spoilage.

These models are equipped with energy-efficient LED lighting that illuminates the interior, making it easy to find items even in low light conditions. The LED lights consume less energy compared to traditional incandescent bulbs, contributing to lower electricity bills and a more sustainable operation.

The GE ZIRS36N and ZIFS36N series also feature adjustable shelving, allowing users to customize the interior layout to accommodate various food items and containers. This flexibility is essential for maximizing storage space and ensuring that everything fits perfectly. Additionally, spill-proof shelves are included, which are designed to contain spills for easy cleanup and to prevent messes from spreading to other compartments.

For added convenience, these refrigerators are designed with a fresh food compartment that includes humidity-controlled crispers. These crispers help maintain the freshness of fruits and vegetables by regulating humidity levels, which is vital for preserving their quality.

Security and access are also a priority, as these models come with external water and ice dispensers. This feature provides instant access to cold water and ice without having to open the refrigerator door, promoting energy efficiency and convenience in daily routines.

In terms of design, the GE ZIRS36N RH, ZIFS36N RH, ZIFS36N LH, and ZIRS36N LH models are finished in high-quality stainless steel, giving them a modern and professional look that enhances any kitchen décor. Their reversible doors offer flexibility for kitchen layouts, allowing the user to configure the fridge to suit their space.

Overall, the GE ZIRS36N RH, ZIFS36N RH, ZIFS36N LH, and ZIRS36N LH refrigerators combine modern technology, user-friendly features, and a stylish design, making them ideal choices for families seeking functionality and efficiency in their kitchen appliances.
Top Page Image Contents