GE ZIRS36N RH Connect, On the unit and tighten nut to union, Turn on the water to check for leaks

Page 12

Installation

36" Stainless Steel Refrigerators, Freezers

Step 7

• Locate and bring tubing to the front of the cabinet.

Connect

• Turn the water on to flush debris from the line. Run

Freezer

about a quart of water through the tubing into a

Water Supply

bucket, then shut off water.

 

Copper Tubing:

 

• Slip a 1/4" nut and ferrule (provided) over both ends

 

of the copper tubing. Insert tube into the union fitting

 

on the unit and tighten nut to union.

 

• Turn on the water to check for leaks.

GE SmartConnect™ Tubing:

•Insert the molded end of the tubing into the refrigerator connection. Tighten the compression nut until it is just hand tight.

•Tighten one additional turn with a wrench. Overtightening can cause leaks!

•Turn on the water to check for leaks.

NOTE: Make sure excess tubing length does not interfere with toekick installation.

Step 8

• Check to make sure power is on by opening the door

 

Check Power

to see if interior lights are on.

 

Step 9

For shipping purposes, the top case trim is secured at

 

Mount Top

84" installation height.

Screws

Grille Panel

To raise case trim to 84-1/2" installation height or to

 

lower case trim to 83-1/2":

 

 

• Loosen 2 screws on both sides and raise or lower the

Top Case Trim

 

top case trim to meet soffit height or to the top of

 

 

 

adjacent cabinets.

 

 

• Tighten all 4 screws.

Raise To

 

• Mount the grille panel by dropping into slots on the

 

Installation

 

case trim.

Height

 

The grille panel assembly is factory set for an 84"

 

 

installation height. If installation height is 83-1/2" or

 

 

84-1/2", order ZGCSS36RH (right hand) or ZGCSS36LH

 

 

(left hand) grille panel kit.

 

 

 

1-1/2"

 

 

min.

 

 

gap

IMPORTANT: Maintain 1-1/2" min. gap between top of doors and bottom of grille panel.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Page Contents Flush or Semi-Flush Enclosure Installations DimensionsCutout ProductSide By Side Installation Freezer Refrigerator Accessory Grille Panel KitsInstallation Between Base Wall Cabinets ExamplesInstallation At End-of-Run Product DimensionsFrameless Cabinets ZIRS36N RH, Refrigerator ZIFS36N RH, FreezerClearances ElectricalWater ConnectionGrounding Important Please read carefullyUse of Adapter plug Use of Extension CordsTools RequiredMaterials HardwareInstall StepWater Line Shut off the main water supplyStep Install Side Panels Anti-Tip BracketsLevel Secure Product to SidesCheck Power ConnectOn the unit and tighten nut to union Turn on the water to check for leaksAdjust Door Step Set temperature control at TemperatureBefore making adjustments ProblemParts List Step Install Spacer Pads Replace Side Case TrimsTools and Materials Required Step Install Anti-Tip Brackets Roll Both Products into OpeningStep Level Both Products Remove 3 screws holding the wire fence on both Step Secure Products To SidesGrille Base Cover Products. Retain fences and all screwsStep Install Grille Base Cover Remove Grille Frame Step Install Soffit Vent Top Reinstall ScrewsMount Outside case trim Unified Grille Panel Step Adjust Door Alignment Pub. No Part No D3003P001

ZIRS36N LH, ZIFS36N LH, ZIFS36N RH, ZIRS36N RH specifications

The GE ZIRS36N RH, ZIFS36N RH, ZIFS36N LH, and ZIRS36N LH are part of General Electric's innovative line of side-by-side refrigerators, designed to meet the needs of modern households while providing exceptional performance and convenience. These models are characterized by a sleek and stylish exterior, making them an attractive addition to any kitchen.

One of the standout features of these refrigerators is their advanced cooling technology. They incorporate a multi-air flow system that ensures even distribution of cold air throughout the refrigerator and freezer compartments. This technology helps maintain optimal temperature levels, keeping food fresher for longer, while also minimizing temperature fluctuations that can lead to spoilage.

These models are equipped with energy-efficient LED lighting that illuminates the interior, making it easy to find items even in low light conditions. The LED lights consume less energy compared to traditional incandescent bulbs, contributing to lower electricity bills and a more sustainable operation.

The GE ZIRS36N and ZIFS36N series also feature adjustable shelving, allowing users to customize the interior layout to accommodate various food items and containers. This flexibility is essential for maximizing storage space and ensuring that everything fits perfectly. Additionally, spill-proof shelves are included, which are designed to contain spills for easy cleanup and to prevent messes from spreading to other compartments.

For added convenience, these refrigerators are designed with a fresh food compartment that includes humidity-controlled crispers. These crispers help maintain the freshness of fruits and vegetables by regulating humidity levels, which is vital for preserving their quality.

Security and access are also a priority, as these models come with external water and ice dispensers. This feature provides instant access to cold water and ice without having to open the refrigerator door, promoting energy efficiency and convenience in daily routines.

In terms of design, the GE ZIRS36N RH, ZIFS36N RH, ZIFS36N LH, and ZIRS36N LH models are finished in high-quality stainless steel, giving them a modern and professional look that enhances any kitchen décor. Their reversible doors offer flexibility for kitchen layouts, allowing the user to configure the fridge to suit their space.

Overall, the GE ZIRS36N RH, ZIFS36N RH, ZIFS36N LH, and ZIRS36N LH refrigerators combine modern technology, user-friendly features, and a stylish design, making them ideal choices for families seeking functionality and efficiency in their kitchen appliances.
Top Page Image Contents