GE RM25 owner manual Installation of the Water Dispenser Line

Page 34

INSTALLATION OF THE WATER DISPENSER LINE

Connect the water line to the refrigerator

-Slip the compression nut and plastic ferrule through the plastic tube.

-After inserting the sleeve, tighten the compression nut onto 1/4”

compression fitting(union).

 

 

 

Compression Nut

 

NOTE

Do not overtighten the compression nut.

Ferrule

 

 

Sleeve

 

 

 

-

Slip the compression ferrule and nut on copper

Compression fitting

 

(or plastic) tubing as shown.

Ferrule

 

Tighten the comperssion nut onto the compres-

 

sion fitting(union).

Compression Nut

 

 

-

Turn water on and check for any leakege.

 

NOTE Waterline must be connected to drinkable water only

(Case 2)

Check the water supply line

Connect the water pipe with coupler and tap.

-Close the main water tap.

-Connect coupler “A” to the tap.

-Every join should be protected with sealing tape.

WARRANTY INFORMATION

CAUTION

The water line must be connect-ed

to the cold water pipe.

If it is connected to the hot water

pipe, it may cause the purifier to malfunction.

This water line installation is not covered by the refriger-ator

 

or ice maker manufacturer's warranty.

 

Follow these instructions carefully to minimise the risk of

 

expensive water damage.

COUPLER “A”

Note:

 

If the coupler does not fit on the current tap, go

 

the nearest authorised service dealer and purchase

 

the right couplers fittings.

TAP

 

Connect the water line to the refrigerator.

 

 

 

 

 

 

 

 

- Remove the compressor cover of the refrigerator.

WATER

LINE

 

CONNECTION NUT

 

 

 

 

 

- Connect the water line to the valve, as shown in the figure.

 

 

 

 

 

 

 

 

 

 

 

 

- When connected, check if there is any leakage.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If any, repeat the connection.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- Reattach the compressor cover of the refrigerator.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COMPRESSOR COVER OF

 

 

 

 

 

 

 

 

 

 

 

 

REFRIGERATOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Side by Side Refrigerator Safety Warning Signs Differ slightly from those described in this manualSafety Warning Signs Major Features Setting UP the RefrigeratorTDM System Time-Divided-Multi-Evaporator system Control Panel Freezer ButtonDigital Panel Freezer FridgeTemperature Control Arctic Select ZoneTM and Fresh Select ZoneTM Shelves and BinsFreezer & Fridge Upper Drawer Upper DrawerDoor Bin Tilt Pocket Food Storage GuideIce Chute Tempered Glass ShelfFruit & Vegetable Drawer Tempered Spill Proof Glass ShelfEgg Container on some models Dairy CompartmentFreeze function keeps the freezer setting temperature Arctic Select Zonetm Drawer GuideFresh Select Zonetm Drawer Guide Fresh FunctionRemoving the Freezer Accessories Removing the Fridge AccessoriesBeverage Stationtm on Some Models Open the Fresh Select Zone Door Open the Arctic Select Zone DoorEmpty the basket before taking it out Empty the basket first before taking it outCleaning the Accessories Lamp cover, marked on Changing the Interior LightPush both sides of the upper Push both sides of the bottom Air duct, then pull outRear hook rear hook Front hook Replace the lamp with a new oneOrdering replacement filters Water Filter Indicator lightUsing the dispenser without the water filter Water FilterChecking the Dimensions of your Entrance Door Installation of the RefrigeratorSelecting the Location for the Refrigerator Arrow with a flat head screwdriver until Turn the left adjusting leg in the directionAppliance is level ➀ Driver ➁ Control Lever Adjusting the Height Between the Doors Making small adjustments between doorsAdjusting the Height Between the Doors Removing the Freezer Door Removing the Refrigerator DoorsRemoving the Front Leg Cover Lift the door straight upRemoving the Refrigerator Doors Removing the Fridge Door How to Disassemble the Arctic Select Zone Door Zone DoorHow to Disassemble the Fresh Select Zone Door Reattaching the Refrigerator Doors Reattaching the Freezer DoorReattaching the Refrigerator Doors Reattaching the Fridge DoorReattaching the Front Leg Cover Shut off the main water supply line and turn the Ice Follow the instructions in the ice maker installation kitChecking the Water Dispenser Line Maker to the off positionInstallation of the Water Dispenser Line Insert the filter as shown and Push until you hear a click Close the filter cartridge coverCheck the amount of water supplied to the ice tray Icemaker must be connected to a cold water line Important Facts About Your DispenserWater Supply to the Icemaker Start the IcemakerBefore YOU Call for Service Workon some models Slow ice cube freezingCube dispenser does not Warm on some modelsAmbient Room Temperature Limits Contact Samsung World Wide

RM25 specifications

The GE RM25 is a powerful and versatile gas turbine engine specifically designed for a variety of applications, including aviation and industrial settings. With its innovative technologies and impressive performance characteristics, the RM25 has established itself as a reliable choice for clients looking for efficiency and durability.

One of the standout features of the GE RM25 is its high thrust-to-weight ratio, which allows the engine to produce significant power while maintaining a relatively low mass. This attribute is particularly beneficial for aircraft, where weight reduction is crucial for enhancing flight performance and fuel efficiency. The engine’s design incorporates advanced materials that contribute to its light weight without compromising strength or reliability.

The RM25 employs a sophisticated modular design, making it easier to maintain and service compared to conventional gas turbines. This modularity ensures that individual components can be easily replaced or repaired, reducing downtime and optimizing operational efficiency. The engine’s service intervals have been extended, allowing for longer operational periods between maintenance checks.

GE's commitment to innovation is evident in the use of cutting-edge technologies within the RM25. The engine features a state-of-the-art digital control system that enhances its performance, providing real-time monitoring and adjustments to optimize fuel consumption and emissions. This technology helps in achieving better environmental compliance, a crucial aspect in today’s aviation and industrial landscapes.

Another key characteristic of the RM25 is its adaptability. The engine can be configured for various operating conditions, making it suitable for a wide range of missions and usages. This versatility is complemented by the engine’s ability to operate efficiently across different altitudes and temperatures, making it a reliable choice for clients in diverse environments.

Finally, the GE RM25 is recognized for its robust safety features, designed to ensure the utmost reliability in high-stakes operations. The engine undergoes rigorous testing and quality assurance processes to maintain the highest standards of performance and safety.

In conclusion, the GE RM25 gas turbine engine represents a remarkable fusion of power, efficiency, and innovation. Its combination of advanced technologies, modular components, and adaptability make it an attractive option for various applications, solidifying its reputation in the industry as a leading choice for reliable performance.
Top Page Image Contents