GE RM25 owner manual Setting UP the Refrigerator, Major Features

Page 4

SETTING UP THE REFRIGERATOR

Once you have performed the following steps, your refrigerator should be fully operational. If not, check the power supply and electricity source. If you have any questions, contact your SAMSUNG Electronics service center.

Place the refrigerator in an appropriate location with reasonable clearance between the wall and the refrigerator. (refer to instal- lation instructions in this mannal)

When the refrigerator is plugged in, the interior light should come on when you open the doors.

Set the temperature control to the coldest temperature and wait for an hour. The freezer should get slightly chilled and the motor should run smoothly.

Once the refrigerator temperature is suffi- ciently low, you can store food in the refrigerator. After starting the refrigerator, it takes a few hours to reach the appropriate temperature.

-You can arrange the Power cable with this Cable tie, after you plug in the refrigerator.

-If the refrigerator is not to be used for a long period of time, you can also arrange the power cable with this cable clamp is located in the top of the refrigerator as shown.

Cable clamp

Cable tie

MAJOR FEATURES

TDM System (Time-Divided-Multi-Evaporator system)

• Each compartment has an evaporator. Also Microprocessors and a refrigerant-control-valve control the refrigeration cycle. The 4 evapora- tors enable improved efficiency and humidity in the fridge. Food odor from the refrigerator does not affect food in other compartments because the cooler and air flow systems are separate.

Multi-Flow System

• Cool air circulates through multiple vents on every shelf level. This pro- vides even distribution of cooling inside cabinets to keep your food fresh longer.

Door Alarm

• Beeper reminds you that the door is open.

Xtra FreshTM

• Optimized humidity control keeps vegetables & fruits fresh.

Arctic Select ZoneTM Drawer

• Arctic Select Zone Drawer is convertible from freezer to refrigerator by TDM system. You can select Power Freeze, Freeze, Soft Freeze, or Cool according to foods.

Fresh Select ZoneTM Drawer

• You can select Soft Freeze, Chill, Cool or Fresh according to the food stored.

In Cool and Fresh, the humidity is controlled by TDM system.

4

Image 4
Contents Side by Side Refrigerator Safety Warning Signs Differ slightly from those described in this manualSafety Warning Signs Major Features Setting UP the RefrigeratorTDM System Time-Divided-Multi-Evaporator system Control Panel Freezer ButtonDigital Panel Freezer FridgeTemperature Control Shelves and Bins Freezer & FridgeArctic Select ZoneTM and Fresh Select ZoneTM Upper Drawer Upper DrawerFood Storage Guide Ice ChuteDoor Bin Tilt Pocket Tempered Glass ShelfTempered Spill Proof Glass Shelf Egg Container on some modelsFruit & Vegetable Drawer Dairy CompartmentFreeze function keeps the freezer setting temperature Arctic Select Zonetm Drawer GuideFresh Select Zonetm Drawer Guide Fresh FunctionRemoving the Freezer Accessories Removing the Fridge AccessoriesBeverage Stationtm on Some Models Open the Arctic Select Zone Door Empty the basket before taking it outOpen the Fresh Select Zone Door Empty the basket first before taking it outCleaning the Accessories Changing the Interior Light Push both sides of the upper Push both sides of the bottomLamp cover, marked on Air duct, then pull outRear hook rear hook Front hook Replace the lamp with a new oneWater Filter Indicator light Using the dispenser without the water filterOrdering replacement filters Water FilterChecking the Dimensions of your Entrance Door Installation of the RefrigeratorSelecting the Location for the Refrigerator Arrow with a flat head screwdriver until Turn the left adjusting leg in the directionAppliance is level ➀ Driver ➁ Control Lever Adjusting the Height Between the Doors Making small adjustments between doorsAdjusting the Height Between the Doors Removing the Refrigerator Doors Removing the Front Leg CoverRemoving the Freezer Door Lift the door straight upRemoving the Refrigerator Doors Removing the Fridge Door How to Disassemble the Arctic Select Zone Door Zone DoorHow to Disassemble the Fresh Select Zone Door Reattaching the Refrigerator Doors Reattaching the Freezer DoorReattaching the Refrigerator Doors Reattaching the Fridge DoorReattaching the Front Leg Cover Follow the instructions in the ice maker installation kit Checking the Water Dispenser LineShut off the main water supply line and turn the Ice Maker to the off positionInstallation of the Water Dispenser Line Insert the filter as shown and Push until you hear a click Close the filter cartridge coverCheck the amount of water supplied to the ice tray Important Facts About Your Dispenser Water Supply to the IcemakerIcemaker must be connected to a cold water line Start the IcemakerBefore YOU Call for Service Slow ice cube freezing Cube dispenser does notWorkon some models Warm on some modelsAmbient Room Temperature Limits Contact Samsung World Wide

RM25 specifications

The GE RM25 is a powerful and versatile gas turbine engine specifically designed for a variety of applications, including aviation and industrial settings. With its innovative technologies and impressive performance characteristics, the RM25 has established itself as a reliable choice for clients looking for efficiency and durability.

One of the standout features of the GE RM25 is its high thrust-to-weight ratio, which allows the engine to produce significant power while maintaining a relatively low mass. This attribute is particularly beneficial for aircraft, where weight reduction is crucial for enhancing flight performance and fuel efficiency. The engine’s design incorporates advanced materials that contribute to its light weight without compromising strength or reliability.

The RM25 employs a sophisticated modular design, making it easier to maintain and service compared to conventional gas turbines. This modularity ensures that individual components can be easily replaced or repaired, reducing downtime and optimizing operational efficiency. The engine’s service intervals have been extended, allowing for longer operational periods between maintenance checks.

GE's commitment to innovation is evident in the use of cutting-edge technologies within the RM25. The engine features a state-of-the-art digital control system that enhances its performance, providing real-time monitoring and adjustments to optimize fuel consumption and emissions. This technology helps in achieving better environmental compliance, a crucial aspect in today’s aviation and industrial landscapes.

Another key characteristic of the RM25 is its adaptability. The engine can be configured for various operating conditions, making it suitable for a wide range of missions and usages. This versatility is complemented by the engine’s ability to operate efficiently across different altitudes and temperatures, making it a reliable choice for clients in diverse environments.

Finally, the GE RM25 is recognized for its robust safety features, designed to ensure the utmost reliability in high-stakes operations. The engine undergoes rigorous testing and quality assurance processes to maintain the highest standards of performance and safety.

In conclusion, the GE RM25 gas turbine engine represents a remarkable fusion of power, efficiency, and innovation. Its combination of advanced technologies, modular components, and adaptability make it an attractive option for various applications, solidifying its reputation in the industry as a leading choice for reliable performance.