GE RM25 owner manual Check the amount of water supplied to the ice tray

Page 36
ICE MAKER

INSTALLATION OF THE WATER DISPENSER LINE

Remove any residual matter inside the water supply line after installing filter.

1) Turn on the main water supply & shut-off the valve of the

 

 

 

water supply line.

 

 

2)

Run water through the dispenser until the water runs clear

ICE

WATER

 

(6~7 minutes). This will clean the water supply system and

 

 

 

clear air from the lines.

 

 

3) Additional flushing may be required in some households.

 

 

4) Open the fridge door and check if water leaks around the

 

 

 

water filter.

 

 

 

• A newly-installed water filter cartridge may cause water to briefly spurt from the dispenser.

 

NOTE

 

 

Check the amount of water supplied to the ice tray.

1)To remove : Set the type of ice to the “Ice Off” position. Lift up (①) and pull out (➁) the ice bucket in the freezer.

ICE BUCKET

To replace : When replacing the drawer, be sure to press it firm- ly into place. If it does not go all the way back, remove it and rotate the drive mechanism 1/4 turn. Then push the drawer back again.

2) Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm. When the bin fills to the level of the feeler arm, the icemaker will stop producing ice.

It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.

Rotate

 

Drive

Feeler Arm

Mechanism

 

• Place the ice tray at the originally provided posistion by manufacturer in order to achieve optimal NOTE ice-freezing.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Side by Side Refrigerator Safety Warning Signs Differ slightly from those described in this manualSafety Warning Signs Setting UP the Refrigerator Major FeaturesTDM System Time-Divided-Multi-Evaporator system Control Panel Freezer ButtonDigital Panel Freezer FridgeTemperature Control Shelves and Bins Freezer & FridgeArctic Select ZoneTM and Fresh Select ZoneTM Upper Drawer Upper DrawerFood Storage Guide Ice ChuteDoor Bin Tilt Pocket Tempered Glass ShelfTempered Spill Proof Glass Shelf Egg Container on some modelsFruit & Vegetable Drawer Dairy CompartmentFreeze function keeps the freezer setting temperature Arctic Select Zonetm Drawer GuideFresh Select Zonetm Drawer Guide Fresh FunctionRemoving the Freezer Accessories Removing the Fridge AccessoriesBeverage Stationtm on Some Models Open the Arctic Select Zone Door Empty the basket before taking it outOpen the Fresh Select Zone Door Empty the basket first before taking it outCleaning the Accessories Changing the Interior Light Push both sides of the upper Push both sides of the bottomLamp cover, marked on Air duct, then pull outRear hook rear hook Front hook Replace the lamp with a new oneWater Filter Indicator light Using the dispenser without the water filterOrdering replacement filters Water FilterInstallation of the Refrigerator Checking the Dimensions of your Entrance DoorSelecting the Location for the Refrigerator Turn the left adjusting leg in the direction Arrow with a flat head screwdriver untilAppliance is level ➀ Driver ➁ Control Lever Adjusting the Height Between the Doors Making small adjustments between doorsAdjusting the Height Between the Doors Removing the Refrigerator Doors Removing the Front Leg CoverRemoving the Freezer Door Lift the door straight upRemoving the Refrigerator Doors Removing the Fridge Door How to Disassemble the Arctic Select Zone Door Zone DoorHow to Disassemble the Fresh Select Zone Door Reattaching the Refrigerator Doors Reattaching the Freezer DoorReattaching the Refrigerator Doors Reattaching the Fridge DoorReattaching the Front Leg Cover Follow the instructions in the ice maker installation kit Checking the Water Dispenser LineShut off the main water supply line and turn the Ice Maker to the off positionInstallation of the Water Dispenser Line Insert the filter as shown and Push until you hear a click Close the filter cartridge coverCheck the amount of water supplied to the ice tray Important Facts About Your Dispenser Water Supply to the IcemakerIcemaker must be connected to a cold water line Start the IcemakerBefore YOU Call for Service Slow ice cube freezing Cube dispenser does notWorkon some models Warm on some modelsAmbient Room Temperature Limits Contact Samsung World Wide

RM25 specifications

The GE RM25 is a powerful and versatile gas turbine engine specifically designed for a variety of applications, including aviation and industrial settings. With its innovative technologies and impressive performance characteristics, the RM25 has established itself as a reliable choice for clients looking for efficiency and durability.

One of the standout features of the GE RM25 is its high thrust-to-weight ratio, which allows the engine to produce significant power while maintaining a relatively low mass. This attribute is particularly beneficial for aircraft, where weight reduction is crucial for enhancing flight performance and fuel efficiency. The engine’s design incorporates advanced materials that contribute to its light weight without compromising strength or reliability.

The RM25 employs a sophisticated modular design, making it easier to maintain and service compared to conventional gas turbines. This modularity ensures that individual components can be easily replaced or repaired, reducing downtime and optimizing operational efficiency. The engine’s service intervals have been extended, allowing for longer operational periods between maintenance checks.

GE's commitment to innovation is evident in the use of cutting-edge technologies within the RM25. The engine features a state-of-the-art digital control system that enhances its performance, providing real-time monitoring and adjustments to optimize fuel consumption and emissions. This technology helps in achieving better environmental compliance, a crucial aspect in today’s aviation and industrial landscapes.

Another key characteristic of the RM25 is its adaptability. The engine can be configured for various operating conditions, making it suitable for a wide range of missions and usages. This versatility is complemented by the engine’s ability to operate efficiently across different altitudes and temperatures, making it a reliable choice for clients in diverse environments.

Finally, the GE RM25 is recognized for its robust safety features, designed to ensure the utmost reliability in high-stakes operations. The engine undergoes rigorous testing and quality assurance processes to maintain the highest standards of performance and safety.

In conclusion, the GE RM25 gas turbine engine represents a remarkable fusion of power, efficiency, and innovation. Its combination of advanced technologies, modular components, and adaptability make it an attractive option for various applications, solidifying its reputation in the industry as a leading choice for reliable performance.
Top Page Image Contents