Thermador DW44ZP, DW44ZW, DW44ZSB manual Selecting a Wash Cycle, END of Cycle Indicators

The dishwasher will wash and dry the contents based on cycle selection made. Refer to Wash Cycle Selec- tion Chart on Page 11 to select the most appropriate cycle for the wash load.

Follow these steps to select a cycle and start the dish- washer:

1.Open dishwasher door.

2.Press the on/off switch.

3.Push the button once for the program desired.

4.Close door until it latches and the program will begin.

5.At the end of the cycle the dishwasher will stop and the “Clean” light will become illuminated.

NOTE: All indicator lights will remain illuminated until the on/off switch is pressed or the door is opened.

Figure 19