GE 197D7799P001 operating instructions Tips Consumer Support, Operating Instructions Installation

Page 3

IMPORTANT SAFETY INFORMATION.

 

READ ALL INSTRUCTIONS BEFORE USING.

ge.com

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Safety Instructions

This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used.

Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

Do not touch the cold surfaces in the freezer compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small.

Be careful closing doors when children are in the area.

In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. Do not place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

Unplug the refrigerator before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

Turning the control to the 0 position does not remove power to the light circuit.

Do not refreeze frozen foods which have thawed completely.

Operating Instructions Installation

MESURES DE SÉCURITÉ IMPORTANTES.

LISEZ D’ABORD TOUTES LES DIRECTIVES.

AVERTISSEMENT!

N’utilisez cet électroménager que pour l’usage auquel il est destiné, comme expliqué dans le présent manuel.

MESURES DE SÉCURITÉ

Lorsque vous utilisez un appareil électrique, observez toujours les mesures de sécurité de base, y compris les suivantes.

Instructions Troubleshooting

Installez le réfrigérateur conformément aux directives d’installation avant de l’utiliser.

Ne laissez pas les enfants grimper, s’asseoir, se tenir debout ni se pendre aux clayettes du réfrigérateur. Ils pourraient endommager le réfrigérateur et se blesser gravement.

N’entreposez et n’utilisez pas d’essence ou autres vapeurs et liquides inflammables à proximité de cet appareil ou de tout autre appareil électroménager.

Éloignez les doigts des parties du réfrigérateur où l’on peut facilement se pincer : les espaces entre les portes et entre les portes et les placards sont toujours étroits. Soyez prudent lorsque vous fermez les portes de l’appareil en présence des enfants.

Si votre réfrigérateur est doté d’une machine à glaçons automatique évitez le contact avec les

pièces mobiles du mécanisme éjecteur, ou avec l’élément chauffant qui libère les glaçons.

Ne posez pas les doigts ou les mains sur le mécanisme de la machine à glaçons pendant que le réfrigérateur est branché.

Ne touchez pas les surfaces froides du congélateur si vous avez les mains humides ou mouillées : la peau risque d’adhérer à ces surfaces très froides.

Débranchez votre réfrigérateur avant de le nettoyer ou de le réparer.

REMARQUE : Nous vous recommandons vivement de confier toute réparation à un technicien qualifié.

Lorsque vous réglez la commande sur 0 (éteint), l’alimentation électrique de l’ampoule n’est pas coupée.

Ne recongelez pas les aliments surgelés qui ont

complètement dégelé.

3

 

Tips Consumer Support

Image 3
Contents Write the model and serial numbers here Model # Serial # RefrigeratorsTroubleshootingTips RefrigerantsRéfrigérants Operating Instructions Installation Instructions TroubleshootingTips Consumer Support Consumer InstallationInstructionsSupport TroubleshootingTips OperatingInstructionsAbout the fresh food compartment shelves About the temperature control dialFruit and Vegetable Drawers About the freezer compartment shelvesAbout the storage drawers Step ShelfAbout the automatic icemaker Safety Instructions OperatingTroubleshooting Tips Consumer Support About storage drawer and cover removalCare and cleaning of the refrigerator SupportConsumer Rollers and Leveling Legs Before YOU BeginRefrigerator Location ClearancesInstalling the Water Line on Some Models Before YOU BeginWhat YOU will Need Route the Tubing Shut OFF the Main Water Supply and Unplug RefrigeratorDrill the Hole for the Valve Fasten the Shutoff ValveStart the Icemaker Installing the Water LineTurn the Water On AT Shutoff Valve Plug in the RefrigeratorRemove the Freezer Door Reversing the Door SwingImportant Notes Tools RequiredRemove the Fresh Food Door Reversing the HardwareTransfer fresh food door handle Reversing the Door HandlesReversing the Door Handles RE-HANGING the DoorsNormal operating sounds Before you call for service…Instructions Safety InstructionsCustomer Warranty Consumer Product Ownership Registration For refrigerators installed in the U.S GE Consumer & Industrial Instructions Troubleshooting GE Will ReplaceWhat GE Will Not Cover GE Appliances Website

197D7799P001 specifications

The GE 197D7799P001 is a cutting-edge component designed for use in various industrial and commercial applications, primarily focusing on enhancing operational efficiency and reliability. This model exemplifies GE's commitment to innovation and performance, which is evident in its advanced features, technologies, and characteristics.

At its core, the 197D7799P001 is engineered to deliver exceptional performance in demanding environments. One of its standout features is its robust design, which allows it to withstand high levels of stress and abrasion. This durability ensures that the component can operate effectively even in harsh conditions, making it a reliable choice for industries such as power generation, oil and gas, and manufacturing.

One of the key technologies integrated into the 197D7799P001 is advanced sensor technology. This feature enables real-time monitoring of performance metrics, which aids in predictive maintenance and reduces the likelihood of unexpected failures. With the ability to provide accurate data, operators can make informed decisions that enhance overall system efficiency and minimize downtime.

Another significant characteristic of the GE 197D7799P001 is its compatibility with various automation systems. The component is designed to seamlessly integrate with existing infrastructure, providing an adaptable solution for various applications. This interoperability is crucial for facilities looking to upgrade their systems without incurring extensive costs associated with complete overhauls.

The component also boasts enhanced connectivity features that support remote monitoring and troubleshooting. By utilizing industry-standard communication protocols, the 197D7799P001 allows operators to access crucial data from anywhere, thus facilitating quicker response times and improving overall operational efficiency.

Furthermore, the GE 197D7799P001 is known for its energy efficiency, contributing to reduced operational costs. Its design minimizes energy consumption while maintaining peak performance levels, aligning with global efforts towards sustainability and resource conservation.

In conclusion, the GE 197D7799P001 is a highly versatile component that combines durability, advanced sensor technology, and energy efficiency. Its ability to integrate with existing systems, coupled with robust monitoring capabilities, makes it an invaluable asset for industries aiming to enhance productivity and operational reliability. As industries continue to evolve, components like the GE 197D7799P001 will play a crucial role in shaping their future.