Samsung RF263TE, RF263BEAEWW Changing the water filter, Touch the “Ice Type/Water, operating

( 8 ) Filter	Water filter usage
	This icon will light up when you need to
	change the filter. After you use about
	300 gallons of water, the filter indicator
	lights up. (about 6 months). After you
	install the new water filter, reset the filter
	indicator by touching the Alarm/hold 3
	sec for Filter Reset button.
	•• If water is not dispensing or
	dispensing slowly, you need to
	replace the water filter because
	the water filter is clogged.
	•• Some areas have large amounts
	of lime in their water, which
	causes the water filter to clog
	more quickly.
Cooling Off	Cooling Off mode (also called Shop
Mode	mode), is designed for use by retailers
	when they are displaying refrigerators on
	the shop floor. In Cooling Off mode, the
	refrigerator’s fan motor and lights work
	normally, but the compressors do not
	run, and the refrigerator and freezer do
	not get cold. To start Cooling Off mode,
	touch and hold the Energy Saver button
	and the Freezer button for 5 seconds
	during normal operation. The refrigerator
	chime sounds and the temperature
	display flashes OF OF.
	To cancel Cooling Off mode, touch and
	hold the Energy Saver and the Freezer
	buttons again for 5 seconds.

Changing the water filter

To reduce risk of water damage to your

WARNING property DO NOT use generic brands of water filters in your SAMSUNG

Refrigerator.

USE ONLY SAMSUNG BRAND WATER FILTER. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from use of a generic water filter. SAMSUNG Refrigerators are

designed to work ONLY WITH SAMSUNG Water
Filter.
The Filter light turns red to let you
know when it is time to change your
water filter cartridge.
To give you time to get a new filter,
the red light comes on just before the	(Red)
capacity of the current filter runs out.

Changing the filter on time provides you with the freshest, cleanest water from your refrigerator.

111Shut off the water supply. Then, turn the water

filter ( 1 ) about 1/4 turn, counter-clockwise.

222Pull the water filter ( 1 ) from the case filter ( 2 ).

		2
		1
	•• To change the water filter more easily,
	shut off the water supply valve.		02operating
••	Sometimes, it is hard to disassemble the water
	filter because impurities in the water cause it
	to stick. If you are having difficulties, grip the
	water filter firmly and pull it hard.
••	When you pull the
	water filter, a little	2
	water can leak from
	the opening. This is	3
	normal. To minimize
	the water leaks, keep
	the filter cartridge horizontal when you pull it.

•• To prevent overflow, empty the water filter tray ( 3 ) and dry around the filter case ( 2 ).

333Insert the new filter into the filter case ( 4 ).

444 Push the filter, and then turn it clockwise until it locks.

•• If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve.

•• The locked symbol should be lined up with the indicator line.

4

555 Touch the “Ice Type/Water

Hold 3 sec for Filter Reset”

button ((Filter Reset)) for

about 3 seconds to reset the water filter. The color of

indicator ( ) changes from red to off.

666 If you turned off the water supply, turn it back on.

For a replacement water filter, you can visit your local home Improvement center or contact the Samsung Parts distributor. Be sure the replacement water filter has the SAMSUNG logo on the box and

on the water filter. Link : http://www. samsungparts.com

operating _13

DA68-02601A(EN+FR+ES)-0.2.indb 13

2012.3.31 9:49:46AM