INSTALLATION OF THE WATER DISPENSER LINE
Connect the water tube to the refrigerator.
1)Connect to the 3/16” white plastic tube on the back of the refrigerator.
2)Slip the compression nut onto the white plastic tube.
3)Screw the union into the white plastic tube and tighten the compression nut.
Do not overtighten the compression nut.
NOTE
4)Silp the compression sleeve and compression nut on copper tubing as shown. Tighten the comperssion nut onto the union.
5)Turn water on and check for any leakege.
Nut
Union
Sleeve
Nut
Waterline must be connected to potable water only
NOTE
Install the water filter.
1)As shown, the fixed cap separate in the refrigerator by rotating it counterclockwise.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown.
2)Write the month you installed the filter on the label. EX) If the water filter was installed in March, put “MAR”
3)Remove the protective cap then position and insert the filter as ishown.
4)Slowly turn the water filter clockwise 90º to align
the indication mark on the cover, locking the filter in posi tion. Do not overtighten.
SEPARATION
OF RED CAP
STICKER
(MONTH INDICATION)
Please check that the indication line aligns with the lock position.
NOTE
COVER FILTER
ALIGN THE INDICATION MARK WITH LOCK POSITION.
27