Samsung RS263TDWP, RS263TDRS SETTING UP the refrigeratorCONT’D, Reattaching the water supply line

setting up your side-by-side refrigerator

SETTING UP the refrigerator(CONT’D)

If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.

Tools you will need

Philips Screwdriver Flat-blade Screwdriver 10mm Socket Wrench

Removing the Front Leg Cover

First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise.

FRONT LEG COVER

SCREW

Separating the water supply line from the refrigerator

1. Remove the water tube by pressing the coupler 2 and pulling the water tube 1 away.

2

1

Do not cut the water line. Gently separate it from the coupler.

Reattaching the water supply line

1.	While pressing the front face of coupler	Line
	2 , insert the water line 1 in the coupler.		Coupler
	Carefully place front cover and push to
	snap it into position.	1	2
2.	Insert 1 clip in plastic bac and check that it		Clip A (1/4”)
	holds the line firmly
			Coupler

The water line must be fully inserted to

the marked line to prevent water leakage from the dispenser.

Line

Coupler

14_ setting up