Samsung RS263TDWP, RS263TDRS, RS263TDPN, RS263TDBP user manual Making mInor adjustments to the doors

setting up your side-by-side refrigerator

Making mInor adjustments to the doors

Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.

When the door of the freezer is higher than the fridge

Adjustment part

Open the doors and adjust them, one at a time, as follows:

1. Unscrew the nut 1 from the lower hinge until it reaches the upper end of the bolt 2 .

3 Wrench

2 Bolt

1 Nut

When you release the nut 1 , make sure that you use the hex wrench provided 3 to loosen the

bolt 2 in a counter-clockwise direction. You should then be able to unscrew the nut

1with your fingers.

2.Adjust the height difference between the doors by turning the bolt 2 clockwise or counter

clockwise .

3 Wrench

2 Bolt

When you turn clockwise , the door will move up.

3.After adjusting the doors, turn the nut 1 clockwise until it reaches the lower end of the bolt,

then tighten the bolt again with the wrench 3 to fix the nut in place 1 .

3 Wrench

2 Bolt

1 Nut

If you do not secure the nut firmly, the bolt may release.

18_ setting up