setting up your side-by-side refrigerator
INSTALLING THE WATER LINE
Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection.
Yrdware store.
• 1/4” compression nut • plastic tubing
• copper tubing | • • ferruleferrule |
Assembled)
Assembled)
1.Tighten the compression nut into the 1/4” compr
-If you are using copper tubing, slip the compr ession nut (not included) and ferrule (not included) on copper tubing (not included) as shown.
-If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the compression tting.
Do not use without the molded end(Bulb) of the plastic tubing .
CAUTION
2.Tighten the compression nut into the compression tting. Do not over
3.Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to r epair or disassemble the water line, cut off 1/4” of the plastic tubing to make sure you get a snug,
When using power cord
To prevent power cor d damage, after product installation, arrange the remaining power cord
20_ setting up