Samsung RFG297HDRS, RFG297HDWP Operating your French Door Refrigerator, Using the Control Panel

Operating your French Door Refrigerator

USING THE CONTROL PANEL

RFG297**, RFG29P**

1

2

3

10 7 8 9

RFG296**, RFG298**, RFG29T**

41

52

63

10 7 8 9

4

5

6

02operating

( 1 ) Energy

Saver

Touching this button turns Energy Saver mode on and off. When you turn Energy Saver on, the Energy Saver icon lights.

Turn Energy Saver off and the icon goes off. The Energy Saver function automatically turns on. when power is supplied to the refrigerator.

If condensation or water drops appear on the doors, turn the Energy Saver mode off.

( 4 ) Lighting/

Hold 3 sec for C ↔ F

Touching this button turns on the Dispenser LED lamp (under the display) in continuous mode so that it stays on continuously.

The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser, touch this button to turn the continuous mode off. Touch and hold this button for 3 seconds to switch the temperature units between °C and °F.

( 2 ) Freezer

(Hold 3

sec for

Power

Freeze)

Touch this button to set the freezer to your desired temperature.

You can set the temperature between

-8°F and 8°F (between -22°C and -14°C). Touch and hold this button for 3 seconds to decrease the time needed to freeze products in the Freezer. It can be helpful if you need to quickly freeze easily spoiled items or if the temperature in the freezer has warmed dramatically (For example, if the door was left open).

( 5 ) Fridge

(Hold

3sec for

Power

Cool)

Touch this button to set the fridge to your desired temperature. You can set the temperature between 34°F and 46°F (between 7°C and 1°C).

Touch and hold this button for 3 seconds to decrease the time needed to cool products in the Refrigerator.

It can be helpful if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically (For example, if the door was left open).

( 3 ) Alarm /

hold 3 sec

for Filter

Reset

This button serves two purposes:

1) To turn the door open alarm on and off

If the door alarm is set to On, an alarm

beeps if any refrigerator door is left open

for more than three minutes.

The beeping stops when you close the

door. The door alarm function is pre-

set to On in the factory. You can turn it

off by touching and then releasing this

( 6 ) Ice Off (Hold 3 sec for child lock)

If you don’t want to make more ice, touch this button. Also, pressing this button for 3 seconds turns on Child Lock which locks the display panel and dispenser buttons so the buttons can not be used. The Child Lock icon lights up to indicate you’ve activated the Child Lock function. Press 3 seconds to unlock.

button. You can turn it back on in the

same fashion. The icon lights up when the

function is on.

2) To reset the water filter life indicator.

After you replace the water filter, touch

and hold this button for 3 seconds to reset

the water filter life indicator.

( 7 ) Ice Type	Touch this button to select your desired
	ice type. Cubed and crushed ice modes
	alternate when you press the button.
	This mode can not be used with the Water
(Cubed) (Crushed)	mode simultaneously.
( 8 ) Water	Touch this button to dispense water. This
	mode can not be used with the Ice Type
	mode simultaneously. Water Water mode will
Water	be off if you touch the Ice Type button.

operating _11

DA68-02488A-09.indb 11 13. 4. 25.

�� 2:08