Whirlpool System I Materials Needed for Basement Installation, Step ladder Additional Tubing

Remove parts from packages.

Check that you have all the parts.

filtration assembly System I (A) filtration assembly System II (B) filtration assembly System III (C) filtration assembly cover (D)

2 mounting screws (E) VI” blue tubing (F)

VI” orange tubing (G)

2-way grey connector with push-in saddle valve assembly (I)

insert (J)

plastic sleeve (K)

brass compression nut (L) literature package

NOTE:

Some state and local plumbing codes prohibit the use of saddle-type valves. The use of saddle-type valves is prohibited in: Alaska, Delaware, Idaho, Kentucky, Massachusetts, Michigan, Minnesota, New Hampshire, North Dakota, Ohio, Oregon and South Dakota. Check your local plumbing codes for details.

Massachusetts CMR 248 strictly prohibits the use of saddle-type valves. The feed-water connection must conform to applicable plumbing codes.

Materials Needed for Basement Installation

l	step ladder		l Additional		tubing,
9VI” drill		bit	Part	No. 4319151		available
l	safety	glasses	from	your	Whirlpool	dealer.

Materials Needed for Optional Sink Faucet Installation

Sink faucet, Part No. 4319154, available from your Whirlpool dealer. Includes: faucet base with blue tubing attached, assembly hardware, faucet spout, 2-way grey connector with push-in ends, and a “T”grey connector with push-in ends,

OpenThis Flap For Installation Overview

2