Cleaning Instructions

_______________________________________________________________________

HORIZONTAL AGITATOR KETTLE

OPERATIONS AND CLEANING INSTRUCTIONS

As with all equipment that has electrical components, care must be exercised when using water and chemicals to clean food service equipment. Use a mild detergent following instructions of the chemical manufacturer. Do not spray water on electrical control panel or components. Do not use harsh or caustic chemicals, especially on o-rings and gaskets.

1.Rinse out food debris from the kettle and flush through the metering filling station (MFS or food pump) if they are still connected. If the kettle is not connected to the food pump, open the valve and allow rinse water to flush into the floor drain.

2.Remove agitator arm:

a.Rotate the agitator until the quick release pull pin is on the top.

b.Turn power to OFF as a safety precaution.

c.Pull pin out.

d.Slide coupling toward side of kettle.

e.Carefully lift end of agitator, pull back and lift out.

f.Remove bushing from shaft holder.

g.Remove scraper blades from agitator by using the spring removal tool provided with the kettle.

h.Wash agitator arm, scraper blades, and springs with mild dish detergent or in dish machine. Air dry.

3.Wash the inside of the kettle with a mild dish detergent as you would any pot or pan. Flush liquid through MFS or by opening the valve. Rinse thoroughly.

4.Remove the valve and tee from the bottom of the kettle by removing the clamp. Remove o-rings. Wash and dry thoroughly. When re-installing the valve, apply USDA approved food grade grease (Chesterton 622 or equal) to o-rings. Gently push tee and valve body in place and secure with clamps.

5.Clean outer drive shaft seal on the side of the kettle by removing thumb screws. Slide seal retainer plate and quad ring away from the kettle or shaft housing. Clean the shaft, seal and quad ring. Before re-installing, apply a liberal amount of USDA approved food grade grease to the opening around the shaft and slide quad ring back in place. Push the seal retainer place back in place and tighten with thumb screws.

6.Remove temperature sensor probe by removing clamp. Slide sensor out of seal holder. Remove o-rings. Clean sensor, seal and o-rings. Before re-installing, apply a liberal amount of USDA approved food grade grease on o-rings.

HA-MKDL-150-CC, HA-MKDL-60-CC, HA-MKDL-100-CC, HA-MKDL-300-CC, HA-MKDL-200-CC specifications

The Cleveland Range HA-MKDL series is an innovative line of rethermalization and cooking equipment designed for commercial kitchens. This series includes models HA-MKDL-200-CC, HA-MKDL-300-CC, HA-MKDL-100-CC, HA-MKDL-60-CC, and HA-MKDL-150-CC, each engineered to meet the diverse needs of food service operations. The HA-MKDL series’ focus lies in efficiency, ease of use, and advanced technology.

One of the most notable features across the HA-MKDL series is the combination of steam and convection cooking capabilities. This dual functionality allows for even heating and ensures that food is heated thoroughly and uniformly. The models can accommodate various types of food items, making them ideal for pastas, meats, vegetables, and sauces.

The HA-MKDL-200-CC, with a capacity of 200 quarts, is well-suited for large-scale operations, typically found in banquet halls or large catering services. Similarly, the HA-MKDL-300-CC takes it a step further, offering a 300-quart capacity, making it one of the largest in the series. This model is designed for high-demand kitchens that require substantial volume without sacrificing quality.

For smaller establishments, the HA-MKDL-100-CC and HA-MKDL-60-CC provide flexibility and efficiency in a more compact footprint. With their 100-quart and 60-quart capacities, respectively, they become ideal options for smaller restaurants or cafes that need reliability without overwhelming their space.

The HA-MKDL-150-CC presents a midpoint option, combining the benefits of capacity and functionality. This model is perfect for mid-sized operations that require efficient reheating and cooking solutions, capable of enhancing productivity without compromising on quality.

Each unit in the Cleveland Range HA-MKDL series comes equipped with user-friendly digital controls, allowing users to easily set and monitor cooking times and temperatures. The easy-to-read display simplifies operation, reducing the learning curve in busy kitchens. Additionally, built-in safety features help prevent overheating, ensuring safe operation.

Durability is another hallmark of the HA-MKDL series, constructed with high-quality stainless steel that withstands the rigors of daily commercial use. The design is not only functional but also easy to clean, promoting hygiene in the food preparation area.

In conclusion, the Cleveland Range HA-MKDL series stands out for its capacity, advanced cooking technologies, and user-friendly design. Whether you’re operating a large banquet service, a catering company, or a small café, these models offer versatile solutions that cater to varied cooking needs, making them an impressive addition to any commercial kitchen.